My curtains are floor length light green with cream sheers my carpet is carmel brown any ideas on color for bedding. Or should I just repaint the whole room. ThanksHelp: Over a year ago I painted my room a two tone green suede faux finish.?
gold or maroon. Help: Over a year ago I painted my room a two tone green suede faux finish.?
I love the way this must look with the sage green and brown. Don't paint it, please. Shop around for the perfect bedding and add some furniture with a very dark brown paint, or go to a lighter shade than the carpet. Sounds classic.
How about a classic with brown and green:
http://www.namebrandbeds.com/sts-paramou鈥?/a>
Or a more Ralph Lauren lodge look:
http://www.horchow.com/store/catalog/pro鈥?/a>
As my point of view as an interior designer I think you should paint your room again because you have caramel brown carpet and green curtains. Then the room is green suede so it too much green depends what style of furniture you have. It hard to tell if you can take pictures of the room and have people like us compare and see what you have done so far. So I hope you can find the right color for interior and find great bedding! Let us know what it looks like!
You can find all kinds of comforters that would work with this room just the way it is. Here are some I hope you like; it's hard to pick because I'm not sure of the shade of your walls, but I hope this helps anyway.
http://www.pemamericaoutlet.com/Adult/gr鈥?/a>
http://www.homedecorators.com/detail.php鈥?/a>
http://www.shophometrends.com/product.as鈥?/a>
http://www.ajmoss.com/lawrence/simplicit鈥?/a>
http://www.ajmoss.com/southern-textiles/鈥?/a>
http://www.ajmoss.com/lawrence/fair-have鈥?/a>
http://www.ajmoss.com/lawrence/dream-law鈥?/a>
Like any of these?
Sunday, February 21, 2010
I painted my kitchen, using faux finish product called a lime wash, glaze. Its been two weeks, runs when wet.
I painted my kitchen two weeks ago, using a lime wash/glaze, you start with a base coat and then apply the wash. But i had splashed some water by accident, and you could see it run. You can actually take a wet paper towel and wipe off the glaze. It looks beautiful but i am worried somethings missing. A worker at Lowes said it takes 30 days to set. To me that is a long time, did i miss a step. I applied base, then applied the glaze. I personally think it needs a clear protector, but that would make a big mess when wet. HELP!!I painted my kitchen, using faux finish product called a lime wash, glaze. Its been two weeks, runs when wet.
I have used this product before and it is a pain to deal with. You need to put a varnish on it. This product rubs off very easily. Once your white wash effect has dried, you can protect it by applying two coats of a low luster water based varnish. (If you don't protect your walls, the low luster diluted paint will rub off easily or run when it gets wet). Oddly enough when you mix the paint with the lime wash you need to add water to it. Otherwise it becomes very dry and when it gets wet it runs and will also rub off very easily. Sorry I am an Interior Designer so I have tips about all kinds of stuff.
I have used this product before and it is a pain to deal with. You need to put a varnish on it. This product rubs off very easily. Once your white wash effect has dried, you can protect it by applying two coats of a low luster water based varnish. (If you don't protect your walls, the low luster diluted paint will rub off easily or run when it gets wet). Oddly enough when you mix the paint with the lime wash you need to add water to it. Otherwise it becomes very dry and when it gets wet it runs and will also rub off very easily. Sorry I am an Interior Designer so I have tips about all kinds of stuff.
Wood grain (Look) paint. Where do you find it at?I am not talking about doing the faux look with tool.?
I saw someone use it on baseboard trim several years back, and it looked decent. Can't seem to find it....
Wood grain (Look) paint. Where do you find it at?I am not talking about doing the faux look with tool.?
http://www.ronseal.co.uk/products/produc鈥?/a>Wood grain (Look) paint. Where do you find it at?I am not talking about doing the faux look with tool.?
Many years ago we bought a false wood grain paint kit. First you painted everything a base color like tan. When that was dry you put on the second color with a stiff brush trying to make streaks. When that was dry you put on the third color the same way as the second. It really looked like real wood. The product came in different shades for different woods. I don't know if this is still available.
There is no such thing.
try Lowe's or home depot.
Wood grain (Look) paint. Where do you find it at?I am not talking about doing the faux look with tool.?
http://www.ronseal.co.uk/products/produc鈥?/a>Wood grain (Look) paint. Where do you find it at?I am not talking about doing the faux look with tool.?
Many years ago we bought a false wood grain paint kit. First you painted everything a base color like tan. When that was dry you put on the second color with a stiff brush trying to make streaks. When that was dry you put on the third color the same way as the second. It really looked like real wood. The product came in different shades for different woods. I don't know if this is still available.
There is no such thing.
try Lowe's or home depot.
Green/yellow paint questionable? Quick fix with faux finish?
I painted a room with a green that I LOVE and a yellow, that I LOVE. I'm just not sure I LOVE them together! Now I'm considering doing a faux paint over the yellow with a brown glaze. Any suggestions.Green/yellow paint questionable? Quick fix with faux finish?
How about picking one of the colors as your main color, and then maybe doing really wide stripes or harlequin diamonds with the other color on an accent wall? That way you can enjoy both, but make a bigger commitment to one of the colors.Green/yellow paint questionable? Quick fix with faux finish?
Do the green over the yellow.Just dip a rag in the green and dab till your hearts content and it will be beautiful
How about picking one of the colors as your main color, and then maybe doing really wide stripes or harlequin diamonds with the other color on an accent wall? That way you can enjoy both, but make a bigger commitment to one of the colors.Green/yellow paint questionable? Quick fix with faux finish?
Do the green over the yellow.Just dip a rag in the green and dab till your hearts content and it will be beautiful
I don't know what color to paint my white vanity. Sink/toilet are white. Counter is dark faux brown granite?
I tried to NOT replace the toilet, that is why I chose another white sink. But the vanity is also white. The dark brown top and white sink certainly have contrast. I would love to repaint the vanity but not sure how that would look. Floor is golden tone stone. Walls are a coco brown. HELP!!!!I don't know what color to paint my white vanity. Sink/toilet are white. Counter is dark faux brown granite?
Leave it white. You have just described the colors in my bathroom. I love it the way it is. There is enough color to make everything blend and look pleasant with the white vanity.shell necklace
Leave it white. You have just described the colors in my bathroom. I love it the way it is. There is enough color to make everything blend and look pleasant with the white vanity.
How to paint faux marble?
wood deskHow to paint faux marble?
Get online and go to www.hgtv.com and search out Faux painting techniques, You should be able to locate a video to show you what you need and how to do it. Good Luck!
Get online and go to www.hgtv.com and search out Faux painting techniques, You should be able to locate a video to show you what you need and how to do it. Good Luck!
I know next to nothing about faux finishes. I would like to paint one wall in my bedroom with a deep burgundy?
(I have that paint color picked out) but I think I would like to put some gold (metallic) embellishment or flecking onto the wall also. Can anyone tell me how to do this? thank you in advanceI know next to nothing about faux finishes. I would like to paint one wall in my bedroom with a deep burgundy?
If you go to Wal Mart in the paint dept they have brochures showing how to do faux finishing or you can go on line to HGTV.com and check out their Faux Finishing .
You might want to try sponge painting over your burgandy it is really the easiest of all the faux painting. You must get a natural sponge though since the plastic ones do not work well at all.
You paint your basic (burgandy) let dry, then dip you sponge in your top coat dab on a paper towel so as not to drip and dab, dab, dab. on the wall. Gold would be very pretty. You can also use a dollar feather duster, I did, and it is very pretty. Mine is yellow and blue.get 3 or 4 dusters.I know next to nothing about faux finishes. I would like to paint one wall in my bedroom with a deep burgundy?
Lowe's has metallic flecks that can be added to paints.
You could paint your walls with your base coat and then go over them with a metallic faux finish glaze. Lowe's carries these as well.
But personally I use Modern Masters glazes. They are expensive, but a little goes a long way and they are more intense metallics.
If you go to Wal Mart in the paint dept they have brochures showing how to do faux finishing or you can go on line to HGTV.com and check out their Faux Finishing .
You might want to try sponge painting over your burgandy it is really the easiest of all the faux painting. You must get a natural sponge though since the plastic ones do not work well at all.
You paint your basic (burgandy) let dry, then dip you sponge in your top coat dab on a paper towel so as not to drip and dab, dab, dab. on the wall. Gold would be very pretty. You can also use a dollar feather duster, I did, and it is very pretty. Mine is yellow and blue.get 3 or 4 dusters.I know next to nothing about faux finishes. I would like to paint one wall in my bedroom with a deep burgundy?
Lowe's has metallic flecks that can be added to paints.
You could paint your walls with your base coat and then go over them with a metallic faux finish glaze. Lowe's carries these as well.
But personally I use Modern Masters glazes. They are expensive, but a little goes a long way and they are more intense metallics.
Faux suede paint?
Do I absolutely have to use a designated ';faux suede paint'; to achieve the look of brushed suede on my walls, or can I just use a regular interior paint and implement the same technique?Faux suede paint?
Yes.
Yes.
Help, I need a catchy name for my faux painting business!?
Hello all, I have been a mural painter off and on for a few years and have finally decided to commit myself full time to this occupation. I would like to incorporate other design elements, such as general faux finishes, finishes for furniture, and room design. I would like to incorporate the word designs into the name, or something similar. I'm an aquarius, so that means I'm quirky and I'd like a name that reflects my personality, yet is also professional and draws the client. Can you help me??? Many thanks for your time....peaceHelp, I need a catchy name for my faux painting business!?
SInce most of your friends are most likely as creative as you are, here's what I'll advise. Invite over about ten of your best friends for a wine tasting party at your house early in the evening and make sure you have a designated driver or two. After everyone has had a glass or two, and start to giggle tell them you are looking for a name for your faux pas painting business.
You'd be surprised at how creative they become. They more they giggle the more chance there is of something very good coming out of it.
Good LuckHelp, I need a catchy name for my faux painting business!?
Beautifaux Designs - ';custom created for you';
Designs Faux You
Designs Finished Faux You
Good luck!
Picture This or Design This
Designs Faux You
take a word or two that describes your business, and look it up in a few languages like japanese. Atari did that, Atari means ';sorounded'; and they did good...ish.
email me at nickb@estamponline.net, i want every detail on your new business.
Color Your World
How about ';A Fresh Start';, with the motto, ';Repaint and thin no more';?
SInce most of your friends are most likely as creative as you are, here's what I'll advise. Invite over about ten of your best friends for a wine tasting party at your house early in the evening and make sure you have a designated driver or two. After everyone has had a glass or two, and start to giggle tell them you are looking for a name for your faux pas painting business.
You'd be surprised at how creative they become. They more they giggle the more chance there is of something very good coming out of it.
Good LuckHelp, I need a catchy name for my faux painting business!?
Beautifaux Designs - ';custom created for you';
Designs Faux You
Designs Finished Faux You
Good luck!
Picture This or Design This
Designs Faux You
take a word or two that describes your business, and look it up in a few languages like japanese. Atari did that, Atari means ';sorounded'; and they did good...ish.
email me at nickb@estamponline.net, i want every detail on your new business.
Color Your World
How about ';A Fresh Start';, with the motto, ';Repaint and thin no more';?
Will oil based wood stain dry when applied over top of water based paint? Using for faux antique look.?
Will oil based stain dry when applied over top of water based paint? I was thinking of using it to do a faux antique look on some cabinets.Will oil based wood stain dry when applied over top of water based paint? Using for faux antique look.?
All stains (oil or water based) are designed to soak into the fibers of natural wood. They do not work well on non-porous surfaces (such as a painted wood surface).
Most likely, if you stain this surface, and let it dry, it will look mottled and dirty, not antique. Also, it will not dry well, remaining tacky/sticky for several days afterward, and may rub off on your skin/clothes whenever it comes into contact with the dried stain.
All stains (oil or water based) are designed to soak into the fibers of natural wood. They do not work well on non-porous surfaces (such as a painted wood surface).
Most likely, if you stain this surface, and let it dry, it will look mottled and dirty, not antique. Also, it will not dry well, remaining tacky/sticky for several days afterward, and may rub off on your skin/clothes whenever it comes into contact with the dried stain.
I'm looking for ';paint in a roll like wallpaper'; with a faux finish advertised on a late night infomercial.
Does anyone know what this is? I do not know the name of the product or manufacturer. I wish I would have written it down. I cannot find anything even remotely close to it online. The color you choose comes in a roll, loads into a device, and rolls on the wall like paint, but applies like wallpaper. It was washable, and mendable if it was marred or scratched in anyway. It basically looked like faux finish wallpaper, but rolled on with a rolling device. It reminded me of ';glass stickers'; or glass clings but for your wall.It wasn't wet, and did not need any time to dry.I swear I did not dream it because I looked it up online after the informercial but forgot to bookmark it. Now that I want to order it, I am completely lost. Help!I'm looking for ';paint in a roll like wallpaper'; with a faux finish advertised on a late night infomercial.
I think this may be what you're looking for??? Hope this helps:) www.bellaandbirch.comshell necklace
I think this may be what you're looking for??? Hope this helps:) www.bellaandbirch.com
I am wondering how to faux paint.?
I have a couple of different rollers to choose from. One of them has something on it that looks similar to a plastic bag, and the other one has carpet literally on it, wrapped around the entire thing. Which roller should I choose? Also, my room is currently divided half way down the wall with a border. The top half is plain white, while the bottom half has a dark blue base color; with a lighter blue, red, and white sponge painted on. I have chosen a shade of red to replace the white half, and was going to use one of the special effect rollers described above. So, how do I mix up the glazing stuff with the red paint? And, how do I apply it to the wall? Lastly, what would be the most effective way to re divide the room, replacing the border (I do not want to put another border up)?
THANKS FOR YOUR HELP!!!I am wondering how to faux paint.?
I'd recommend going to a paint store or home improvement store when they have the hands on seminars on this -- big help! Otherwise, you want to get two shades of paint at least 2 colors apart on the paint chart. Mix the top color with a glaze you buy at the paint store, then apply it with the technique you select. Practice on a few pieces of cardboard of old drywall sections to get the look you want. Here's more:
http://www.oldhouseweb.com/stories/Detai鈥?/a>I am wondering how to faux paint.?
Thanks for the info!!
THANKS FOR YOUR HELP!!!I am wondering how to faux paint.?
I'd recommend going to a paint store or home improvement store when they have the hands on seminars on this -- big help! Otherwise, you want to get two shades of paint at least 2 colors apart on the paint chart. Mix the top color with a glaze you buy at the paint store, then apply it with the technique you select. Practice on a few pieces of cardboard of old drywall sections to get the look you want. Here's more:
http://www.oldhouseweb.com/stories/Detai鈥?/a>I am wondering how to faux paint.?
Thanks for the info!!
Report Abuse
How to faux paint antinque ceiling tiles?
I have bought tin LIKE ceiling tiles. I want to paint them an antique bronze finish. It is bronze with a dark color in the crevices. I have done some searching on the internet and haven't found exactly what I am looking for. It is for a small bath that has ';oil rubbed bronze'; shower fixtures. (90 year old house) Has the clawfoot tub and surround shower. We are completely gutting and redoing. Does anyone have any ideas what to do with the fake tin ceiling. Or should I just paint and leave white? The bathroom is VERY small. 8 x 5How to faux paint antinque ceiling tiles?
I don't know how well this would work for you, if at all since I've never used it before. There are spray paints you can use with an antique finish. Here's an example
http://www.rustoleum.com/CBGProduct.asp?pid=85
Good luck to you!
I don't know how well this would work for you, if at all since I've never used it before. There are spray paints you can use with an antique finish. Here's an example
http://www.rustoleum.com/CBGProduct.asp?pid=85
Good luck to you!
How to faux paint a heavily textured wall?
i painted my wall with a color that i had mixed at home and thought i would have plenty paint left over for touch ups, i had just enough paint to finish the job. I now have little nicks here and there that i would like to fix. I had previously hand tectured the walls very heavily and my question is, Could I faux paint over the color i allready have so that the paint won't have to match completely,or with the heavy texture would it look like a mess? Also if ishould faux what technique should i do? the color is like a caramel color.thanksHow to faux paint a heavily textured wall?
I have gotten a nice faux finish on heavily textured walls by using a color that is one or two steps lighter or darker than the wall color. I use a wide flat bristle brush (like 4'; to 6'; wide).
I thin the paint just a little and then dip the tips of the brush in it and swipe it once on a paper towel to get any excess off. Then, I just lightly brush in a random fashion over the wall leaving some of the undercoat wall color uncovered. Try it on an area that will be hidden by the bed or dresser first so you get the hang of it.
When it's finished, it has an old world European look. The raised areas of the texture will just naturally grab more of the 2nd color so it's pretty easy to do. Good luck!! : )How to faux paint a heavily textured wall?
We have textured walls also. My mother gave me this idea. I had painted the room green %26amp; it turned out too dark due to the porous plaster walls. Take a contrasting color - in my case a pale green in the same color palate. Paint a coat on the wall using a thick roller. 2 inch pile %26amp; very fluffy. Then while the paint is wet, take the lightest weight plastic drop cloth and press it on the wall. Do not smooth it out, you want the wrinkles. Then pull it off. Looks really cool. Is really fun %26amp; messy! :) Good luck.
I have gotten a nice faux finish on heavily textured walls by using a color that is one or two steps lighter or darker than the wall color. I use a wide flat bristle brush (like 4'; to 6'; wide).
I thin the paint just a little and then dip the tips of the brush in it and swipe it once on a paper towel to get any excess off. Then, I just lightly brush in a random fashion over the wall leaving some of the undercoat wall color uncovered. Try it on an area that will be hidden by the bed or dresser first so you get the hang of it.
When it's finished, it has an old world European look. The raised areas of the texture will just naturally grab more of the 2nd color so it's pretty easy to do. Good luck!! : )How to faux paint a heavily textured wall?
We have textured walls also. My mother gave me this idea. I had painted the room green %26amp; it turned out too dark due to the porous plaster walls. Take a contrasting color - in my case a pale green in the same color palate. Paint a coat on the wall using a thick roller. 2 inch pile %26amp; very fluffy. Then while the paint is wet, take the lightest weight plastic drop cloth and press it on the wall. Do not smooth it out, you want the wrinkles. Then pull it off. Looks really cool. Is really fun %26amp; messy! :) Good luck.
How do I remove a faux-painted decal from a painted wooden cabinet without messing up the cabinet's paint?
I moved into a home that has wooden kitchen cabinets painted with white paint. There are also some decals pressed on that are supposed to look faux-handpainted. To me, they just look tacky, and I'd like to remove them. The problem is that when I try to remove the decals, the paint from the cabinet itself starts to come off as well. So far, I've tried rubbing alcohol and nail polish remover. Any other ideas on how to remove the decals without messing up the underlying paint? Thanks!How do I remove a faux-painted decal from a painted wooden cabinet without messing up the cabinet's paint?
Previous answer was good but it is about a metal surface - a different kind of paint is used with wood.
Take a warm washcloth and press against the decal for a moment to slightly heat the adhesive. Use your thumb nail along the decal edge to see if comes up without paint. If the cab paint is oil and the adhesive backing is waterbased, this will work fine. If painted with latex (waterbased)paint and decal has an oil based or a stronger waterbased glue, then the adhesive is stronger than the paint and that's why it takes the paint off with it. Then you have to make a major decision about living with the decals or repainting the cabinets.How do I remove a faux-painted decal from a painted wooden cabinet without messing up the cabinet's paint?
use a blow dryer to warm adhesive and peel off, I had to do that with a work truck that had a bunch of old company decals on it
Previous answer was good but it is about a metal surface - a different kind of paint is used with wood.
Take a warm washcloth and press against the decal for a moment to slightly heat the adhesive. Use your thumb nail along the decal edge to see if comes up without paint. If the cab paint is oil and the adhesive backing is waterbased, this will work fine. If painted with latex (waterbased)paint and decal has an oil based or a stronger waterbased glue, then the adhesive is stronger than the paint and that's why it takes the paint off with it. Then you have to make a major decision about living with the decals or repainting the cabinets.How do I remove a faux-painted decal from a painted wooden cabinet without messing up the cabinet's paint?
use a blow dryer to warm adhesive and peel off, I had to do that with a work truck that had a bunch of old company decals on it
Faux Suede Paint?
I am thinking of trying the Ralph Lauren Faux Suede Paint, but I have heard that it is somewhat hard to work with. I was just wondering if anyone can tell me their experiences with this paint.Faux Suede Paint?
Here's some faux suede techniques that might help do a good job:
http://www.lowes.com/lowes/lkn?action=ho鈥?/a>
Here's some faux suede techniques that might help do a good job:
http://www.lowes.com/lowes/lkn?action=ho鈥?/a>
I am making a faux finish to look like homemade paper with flowers in it. Anyone have a paint to paper ratio?
I have tried a craft paint called paper perfect and its great, but it costs $4.50 for an 8 oz jar and most places have discontinued it. I have been having a hard time finding it at all and the company has not responded to my emails.
So, I was wondering if anyone has made a paper paint for themselves and knew the ratio of paint, paper pulp and water to use? I can experiment, but thought I would ask here first.
Any suggestions or tips on how to make homemade paper would be appreciated as well.I am making a faux finish to look like homemade paper with flowers in it. Anyone have a paint to paper ratio?
There is #151 different results on many types of faux finishings.. DYI - Do it yourself projects ..etc
http://web.diynet.com/diy/web/searchResu鈥?/a>I am making a faux finish to look like homemade paper with flowers in it. Anyone have a paint to paper ratio?
I can't answer your question about the paint, but here is an article about paper,making: http://www.theartfulcrafter.com/paper-ma鈥?/a>shell necklace
So, I was wondering if anyone has made a paper paint for themselves and knew the ratio of paint, paper pulp and water to use? I can experiment, but thought I would ask here first.
Any suggestions or tips on how to make homemade paper would be appreciated as well.I am making a faux finish to look like homemade paper with flowers in it. Anyone have a paint to paper ratio?
There is #151 different results on many types of faux finishings.. DYI - Do it yourself projects ..etc
http://web.diynet.com/diy/web/searchResu鈥?/a>I am making a faux finish to look like homemade paper with flowers in it. Anyone have a paint to paper ratio?
I can't answer your question about the paint, but here is an article about paper,making: http://www.theartfulcrafter.com/paper-ma鈥?/a>
Help, I need a catchy name for my faux painting business!?
Hello all, I have been a mural painter off and on for a few years and have finally decided to commit myself full time to this occupation. I would like to incorporate other design elements, such as general faux finishes, finishes for furniture, and room design. I would like to incorporate the word designs into the name, or something similar. I'm an aquarius, so that means I'm quirky and I'd like a name that reflects my personality, yet is also professional and draws the client. Can you help me??? Many thanks for your time....peaceHelp, I need a catchy name for my faux painting business!?
I, too, am Aquarian...and I LOVE doing faux finishes, especially on furniture and accessories...I spent 16 years as an interior designer...
';Faux Pas Designs';
';Faux Bleau';
';The Painted Lady';
';The Faux Chateau';
';Faux Verseau'; (';Verseau'; is french for Aquarius)
Or...';(Your name or just last name) Designs, Faux Artisite';Help, I need a catchy name for my faux painting business!?
Aquarius Designs - Simple catchy and reflects you!
Faux Real
';NOW'; WALL DESIGNS FOR YOU
I, too, am Aquarian...and I LOVE doing faux finishes, especially on furniture and accessories...I spent 16 years as an interior designer...
';Faux Pas Designs';
';Faux Bleau';
';The Painted Lady';
';The Faux Chateau';
';Faux Verseau'; (';Verseau'; is french for Aquarius)
Or...';(Your name or just last name) Designs, Faux Artisite';Help, I need a catchy name for my faux painting business!?
Aquarius Designs - Simple catchy and reflects you!
Faux Real
';NOW'; WALL DESIGNS FOR YOU
How do I remove a faux-painted decal from a painted wooden cabinet without messing up the cabinet's paint?
I moved into a home that has wooden kitchen cabinets painted with white paint. There are also some decals pressed on that are supposed to look faux-handpainted. To me, they just look tacky, and I'd like to remove them. The problem is that when I try to remove the decals, the paint from the cabinet itself starts to come off as well. So far, I've tried rubbing alcohol and nail polish remover. Any other ideas on how to remove the decals without messing up the underlying paint? Thanks!How do I remove a faux-painted decal from a painted wooden cabinet without messing up the cabinet's paint?
Previous answer was good but it is about a metal surface - a different kind of paint is used with wood.
Take a warm washcloth and press against the decal for a moment to slightly heat the adhesive. Use your thumb nail along the decal edge to see if comes up without paint. If the cab paint is oil and the adhesive backing is waterbased, this will work fine. If painted with latex (waterbased)paint and decal has an oil based or a stronger waterbased glue, then the adhesive is stronger than the paint and that's why it takes the paint off with it. Then you have to make a major decision about living with the decals or repainting the cabinets.How do I remove a faux-painted decal from a painted wooden cabinet without messing up the cabinet's paint?
use a blow dryer to warm adhesive and peel off, I had to do that with a work truck that had a bunch of old company decals on it
Previous answer was good but it is about a metal surface - a different kind of paint is used with wood.
Take a warm washcloth and press against the decal for a moment to slightly heat the adhesive. Use your thumb nail along the decal edge to see if comes up without paint. If the cab paint is oil and the adhesive backing is waterbased, this will work fine. If painted with latex (waterbased)paint and decal has an oil based or a stronger waterbased glue, then the adhesive is stronger than the paint and that's why it takes the paint off with it. Then you have to make a major decision about living with the decals or repainting the cabinets.How do I remove a faux-painted decal from a painted wooden cabinet without messing up the cabinet's paint?
use a blow dryer to warm adhesive and peel off, I had to do that with a work truck that had a bunch of old company decals on it
Has anyone used the Behr Faux Venetian Plaster to paint with? Is so, did you like it??
I love it I love it, it takes a lot of practice to do a perfect smooth finish, but you can get anything from a rustic finish to a very modern smooth effect. I have done 3 walls in my home. If you are intending to use it near water like in a bathroom, or even around light switches, and electrical outlets, you have to put the clear coat made for the plaster, to protect it, otherwise it picks up oil from your hands and gets discolored, even around heater or a/c registers.
Faux Suede Paint?
I was just wondering if using regular paint for my walls and a darker, more contrasting, faux suede paint for my decorative art niche and a built-in entertainment center pop-out, would look okay? So basically, can faux suede paint be used for accents, or is it more for use on large areas?Faux Suede Paint?
I use Ralph Lauren (spelling???) suede paint as an accent with a rich tan color and it is the prettiest thing I have painted in a while.
I say go for it and if it doesn't work out paint over it.Faux Suede Paint?
Yes it can...As the person above me posted Ralph i have no idea the last name spelling paint works great for this...
I use Ralph Lauren (spelling???) suede paint as an accent with a rich tan color and it is the prettiest thing I have painted in a while.
I say go for it and if it doesn't work out paint over it.Faux Suede Paint?
Yes it can...As the person above me posted Ralph i have no idea the last name spelling paint works great for this...
Can you pain right over ';faux wood'; paneling? Do you need to do any prep work or need special paint?
I have painted over tons of paneling! You need to use a undercoat first. I used Kilz. Let that dry for at least 24 hours. Then paint with a good, high quality paint. There should be no problem. If you don't use a primer, the paint WILL chip. Trust me, I did it without and had a mess.
Faux finishing paint techniques tips...?
Has anyone ever done an interior painting faux finish? I have tried sponging and dragging on walls and hated both results. I did crackle on furniture and I loved it. Is anyone familiar with lye treatment? Is it difficult? I'm thinking about doing it in my dining room and would appreciate a heads up if it is not worth it.Faux finishing paint techniques tips...?
try sherwinwilliams.com or go to home depot they can show youshell necklace
try sherwinwilliams.com or go to home depot they can show you
Have a faux brick wall in dining room/kitchen. Should I paint it red like the other half in the living room?
My other options were to paint it a neutral (Sherwin Williams ';nomadic desert';) or leave it because it ties in the countertops, sage green walls in the adjoining family room as well as the red wall in the living room. I am trying to get the house ready to sell, so I want to appeal to as many buyers as possible. Thanks for any suggestions!!Have a faux brick wall in dining room/kitchen. Should I paint it red like the other half in the living room?
The Sherwim williams sounds good. Nuetral is always best for a resale.
The Sherwim williams sounds good. Nuetral is always best for a resale.
What kind of paint should I use on faux-leather shoes?
Would puff paint or fabric paint work?What kind of paint should I use on faux-leather shoes?
Acrylic paint will probably work best, but I found an awesome site for you on how to paint your shoes without cracking. Check it out and I hope I helped!
http://www.rheingold.com/paintyourshoesh鈥?/a>What kind of paint should I use on faux-leather shoes?
Why would u paint ur shoes? if u wanna renew the fabric on them, they have hundreds of products that work for that. But paint?
Acrylic paint will probably work best, but I found an awesome site for you on how to paint your shoes without cracking. Check it out and I hope I helped!
http://www.rheingold.com/paintyourshoesh鈥?/a>What kind of paint should I use on faux-leather shoes?
Why would u paint ur shoes? if u wanna renew the fabric on them, they have hundreds of products that work for that. But paint?
Is it a faux paux to wear flip flops/sandals and not have your toes painted?
like go to the store, shop, eat out, etc.... wherever!Is it a faux paux to wear flip flops/sandals and not have your toes painted?
It doesnt matter. People dont pay attention to your toenails at all %26amp; they are not going to like omg shes not wearing nailpolish. So my answer is NO!!! It looks BETTER without it anyways, they look cleaner %26amp; whiter %26amp; natural. You may want to not wear it if it is chipped off but even then its ok, who cares. Most normal people dont even notice.Is it a faux paux to wear flip flops/sandals and not have your toes painted?
I'm no foot fetishist, but if a woman is going to wear sandals and not have her nails done, she should at least have the decency to wear socks.
EWWWW why would you even think about going out and wearing sandals if they arent painted!!!:) I LOVE TOENAIL POLISH... dont let them ever be bare!!!:)
so to answer your question.... YES!!!!
shoud ahve the toe nails painted, more sexy and elegant
yes if your really that high maitenance
It doesnt matter. People dont pay attention to your toenails at all %26amp; they are not going to like omg shes not wearing nailpolish. So my answer is NO!!! It looks BETTER without it anyways, they look cleaner %26amp; whiter %26amp; natural. You may want to not wear it if it is chipped off but even then its ok, who cares. Most normal people dont even notice.Is it a faux paux to wear flip flops/sandals and not have your toes painted?
I'm no foot fetishist, but if a woman is going to wear sandals and not have her nails done, she should at least have the decency to wear socks.
EWWWW why would you even think about going out and wearing sandals if they arent painted!!!:) I LOVE TOENAIL POLISH... dont let them ever be bare!!!:)
so to answer your question.... YES!!!!
shoud ahve the toe nails painted, more sexy and elegant
yes if your really that high maitenance
Thursday, February 18, 2010
Does spray-on Chalkboard paint rust? I WANT to faux finish rust on an already black surface. Will it work?
The only other idea I have is to use metal flakes, but I'm worried the clear-coat to apply the metal flakes would protect the metal flakes from actually rusting.
Is there a simple (safe?) household protect I can use to make the rusting go faster?Does spray-on Chalkboard paint rust? I WANT to faux finish rust on an already black surface. Will it work?
There is actually a paint system you can purchase that will effectively create rust on any surface....here is the link.
http://www.shopartplace.com/modern-maste鈥?/a>Does spray-on Chalkboard paint rust? I WANT to faux finish rust on an already black surface. Will it work?
get some cheap small plastic bottles of paint from a craft store that are variations of the ';rust'; effect you are looking for. Get a plastic container lid and dab a little of each shade on it. Then get a dry sponge and pick up the paint. Get a black piece of cardboard and dab the sponge on the cardboard until you have the amount and texture you are seeking.
Simply do this on the chalkboard. When you have achieved your effect you can coat it with a matt transparent urethane, or just leave it if it is not going to be touched.
Forget the metal flakes...too difficult.
It depends on your surface I used lemons to help rust a metal plate .sometimes you may have to play with paint color to get the rust look.stainless will not rust take some steel wool and wet it place on the surface old brillo pads work great.
Is there a simple (safe?) household protect I can use to make the rusting go faster?Does spray-on Chalkboard paint rust? I WANT to faux finish rust on an already black surface. Will it work?
There is actually a paint system you can purchase that will effectively create rust on any surface....here is the link.
http://www.shopartplace.com/modern-maste鈥?/a>Does spray-on Chalkboard paint rust? I WANT to faux finish rust on an already black surface. Will it work?
get some cheap small plastic bottles of paint from a craft store that are variations of the ';rust'; effect you are looking for. Get a plastic container lid and dab a little of each shade on it. Then get a dry sponge and pick up the paint. Get a black piece of cardboard and dab the sponge on the cardboard until you have the amount and texture you are seeking.
Simply do this on the chalkboard. When you have achieved your effect you can coat it with a matt transparent urethane, or just leave it if it is not going to be touched.
Forget the metal flakes...too difficult.
It depends on your surface I used lemons to help rust a metal plate .sometimes you may have to play with paint color to get the rust look.stainless will not rust take some steel wool and wet it place on the surface old brillo pads work great.
How do you faux paint?
i am wanting to faux paint on canvas. what materials will i need?How do you faux paint?
I know that many craft stores sell kits, for faux finishes. There are a lot of options but this site is all about faux painting and worth a look:
http://www.how-to-faux-finish.com/
I know that many craft stores sell kits, for faux finishes. There are a lot of options but this site is all about faux painting and worth a look:
http://www.how-to-faux-finish.com/
I want to put a faux finish on a ceramic bowl. Do I need to use a certain type of paint?
Yes. Ceramic paint, at any craft store.shell necklace
Paint faux idea for my living room?
Hi,
I just bought an old house and it needs lots of updating.
I would like to paint faux my walls green and my celing red either a red yellow or red orange or plan red.
Is it wrong to do two differt colors liie that will it look good?
Also they have old molding in the house..should I pant it white or paint it in a pant faux color.
Any ideas on the two differnt colors would be ok to do that...and the molding.Paint faux idea for my living room?
I don't understand what you mean by faux colour. There are different paint techniques that are referred to as faux. I strongly suggest you do not paint the ceiling the colours you are thinking of..stick to off white for the ceilings or white if you really like that. Coloured ceilings will make the room dark and closed in feeling. If it is an old house, then the rooms probably do not have a lot of natural lighting, so a lighter colour (soft colours) on the wall will make the room brighter. I like trim, doors and ceilings in off white all the way throughout the home.Paint faux idea for my living room?
DO NOT paint the ceiling! Red is a very hard color to paint let alone trying to paint a ceiling. Have you ever painted a ceiling? It's one of the hardest things to do and requires a ceiling paint which is thicker so gravity won't have it drip and splatter all over the place. Ceilings are usually done with a spray gun.
As far as the colors go....red and green will make it look like Christmas. Get some paint sample color chips and tape them on the walls. Since it's an old house think about painting the bottom half a dark cranberry or any dark color even chocolate brown and the top half a lighter complimentary color and place a piece of molding on the wall for a chair rail. Place a piece of masking tape on the wall at different heights anywhere from 32';-40';and see what looks good for you. I have mine at 40';. Paint the all the molding white or off-white.
http://www.sherwin-williams.com/visualiz鈥?/a>
This site will show you the complimentary colors. Choose the middle bathroom in the second row since it has a chair rail.
I got this book at Safeway and it's pretty neat to lok thru and get painting ideas. You could see if they have it at you library
http://www.amazon.com/gp/offer-listing/0鈥?/a>
ALSo check this out onbetter homes and gradens Faux painting http://www.bhg.com/decorating/paint/deco鈥?/a>
leave the ceiling white as it makes the room appear bigger plus puts more focus on the coloured wall. Try 2 limit urself to 1 faux feature wall per room. Im just about 2 do my room white with a red feature wall and another wall with blackboard paint its reallly fun and goes with everything!!
those sounds like really ugly colors. you should paint the ceilings and trims white and then just do the walls fun colors. this way you don't go overboard. an make sure the colors you chose for the walls go with your current decor unless you plan on buying new peices
I don't know about the colors you plan on using, sounds pretty wild (for me) But I do know that Green and Red Complement each other. The Molding I would paint High Gloss White. I'm not a painter but I have a good friend that is and when I painted my place he told me when I paint the Doors, Door Jams, Door Frame and Wall Base to use White High Gloss or Gloss White Exterior paint, it's more durable and it doesn't mark up as bad as interior paint, And he was right I have 4 grand kids and it holds up pretty well. My wife painted our bedroom with Faux it looks really nice the colors she used was: Base color - Cream White, First color Lavender and the second Color was Fuchsia girly colors but looks nice.
Good Luck
I just bought an old house and it needs lots of updating.
I would like to paint faux my walls green and my celing red either a red yellow or red orange or plan red.
Is it wrong to do two differt colors liie that will it look good?
Also they have old molding in the house..should I pant it white or paint it in a pant faux color.
Any ideas on the two differnt colors would be ok to do that...and the molding.Paint faux idea for my living room?
I don't understand what you mean by faux colour. There are different paint techniques that are referred to as faux. I strongly suggest you do not paint the ceiling the colours you are thinking of..stick to off white for the ceilings or white if you really like that. Coloured ceilings will make the room dark and closed in feeling. If it is an old house, then the rooms probably do not have a lot of natural lighting, so a lighter colour (soft colours) on the wall will make the room brighter. I like trim, doors and ceilings in off white all the way throughout the home.Paint faux idea for my living room?
DO NOT paint the ceiling! Red is a very hard color to paint let alone trying to paint a ceiling. Have you ever painted a ceiling? It's one of the hardest things to do and requires a ceiling paint which is thicker so gravity won't have it drip and splatter all over the place. Ceilings are usually done with a spray gun.
As far as the colors go....red and green will make it look like Christmas. Get some paint sample color chips and tape them on the walls. Since it's an old house think about painting the bottom half a dark cranberry or any dark color even chocolate brown and the top half a lighter complimentary color and place a piece of molding on the wall for a chair rail. Place a piece of masking tape on the wall at different heights anywhere from 32';-40';and see what looks good for you. I have mine at 40';. Paint the all the molding white or off-white.
http://www.sherwin-williams.com/visualiz鈥?/a>
This site will show you the complimentary colors. Choose the middle bathroom in the second row since it has a chair rail.
I got this book at Safeway and it's pretty neat to lok thru and get painting ideas. You could see if they have it at you library
http://www.amazon.com/gp/offer-listing/0鈥?/a>
ALSo check this out onbetter homes and gradens Faux painting http://www.bhg.com/decorating/paint/deco鈥?/a>
leave the ceiling white as it makes the room appear bigger plus puts more focus on the coloured wall. Try 2 limit urself to 1 faux feature wall per room. Im just about 2 do my room white with a red feature wall and another wall with blackboard paint its reallly fun and goes with everything!!
those sounds like really ugly colors. you should paint the ceilings and trims white and then just do the walls fun colors. this way you don't go overboard. an make sure the colors you chose for the walls go with your current decor unless you plan on buying new peices
I don't know about the colors you plan on using, sounds pretty wild (for me) But I do know that Green and Red Complement each other. The Molding I would paint High Gloss White. I'm not a painter but I have a good friend that is and when I painted my place he told me when I paint the Doors, Door Jams, Door Frame and Wall Base to use White High Gloss or Gloss White Exterior paint, it's more durable and it doesn't mark up as bad as interior paint, And he was right I have 4 grand kids and it holds up pretty well. My wife painted our bedroom with Faux it looks really nice the colors she used was: Base color - Cream White, First color Lavender and the second Color was Fuchsia girly colors but looks nice.
Good Luck
I am making a faux finish to look like homemade paper with flowers in it. Anyone have a paint to paper ratio?
I have tried a craft paint called paper perfect and its great, but it costs $4.50 for an 8 oz jar and most places have discontinued it. I have been having a hard time finding it at all and the company has not responded to my emails.
So, I was wondering if anyone has made a paper paint for themselves and knew the ratio of paint, paper pulp and water to use? I can experiment, but thought I would ask here first.
Any suggestions or tips on how to make homemade paper would be appreciated as well.I am making a faux finish to look like homemade paper with flowers in it. Anyone have a paint to paper ratio?
I think you need to by them.I am making a faux finish to look like homemade paper with flowers in it. Anyone have a paint to paper ratio?
Rice paper or parchment paper would be good to use and I believe you can get rice paper in art studio and parchment paper in the kitchen isle of grocery store.
There is a way to make homemade paper -- search the web first. Many instructions out there.
So, I was wondering if anyone has made a paper paint for themselves and knew the ratio of paint, paper pulp and water to use? I can experiment, but thought I would ask here first.
Any suggestions or tips on how to make homemade paper would be appreciated as well.I am making a faux finish to look like homemade paper with flowers in it. Anyone have a paint to paper ratio?
I think you need to by them.I am making a faux finish to look like homemade paper with flowers in it. Anyone have a paint to paper ratio?
Rice paper or parchment paper would be good to use and I believe you can get rice paper in art studio and parchment paper in the kitchen isle of grocery store.
There is a way to make homemade paper -- search the web first. Many instructions out there.
Exact paint colors I can use to get the golden tuscan faux finish?
I am repainting a kitchen with oak cabinets and oak floor.Exact paint colors I can use to get the golden tuscan faux finish?
Are you looking to do colorwashing like this?
http://www.hgtv.com/decorating/decorativ鈥?/a>
All of the materials you need %26amp; intructions for how to do it are on that page.Exact paint colors I can use to get the golden tuscan faux finish?
I'm looking for you !
I found Benjamin Moore it's a'; fresco'; finish that you will need to accomplish the look.
http://www.benjaminmoore.com/bmpsweb/Sho鈥?/a>
well most likely you'll need color glaze on top of the main color. a paint store often has pre made kits for different finishes. janovic plaza is a real (not online) store that sells these. you can also try posting on a message board http://www.muralsplus.com/cgi-bin/discus鈥?/a>
Are you looking to do colorwashing like this?
http://www.hgtv.com/decorating/decorativ鈥?/a>
All of the materials you need %26amp; intructions for how to do it are on that page.Exact paint colors I can use to get the golden tuscan faux finish?
I'm looking for you !
I found Benjamin Moore it's a'; fresco'; finish that you will need to accomplish the look.
http://www.benjaminmoore.com/bmpsweb/Sho鈥?/a>
well most likely you'll need color glaze on top of the main color. a paint store often has pre made kits for different finishes. janovic plaza is a real (not online) store that sells these. you can also try posting on a message board http://www.muralsplus.com/cgi-bin/discus鈥?/a>
I tried faux marbling a firplace mantle and the oil based paint did not adhere to my base coat.?
My base coat was a latex semi-gloss? Does the base coat need to be oil based as well?I tried faux marbling a firplace mantle and the oil based paint did not adhere to my base coat.?
There is no reason why you have to use oil based products. There are many lines of faux products which are all water based.
Just as the user above my post said, latex and oil do not work together.
Adicolor makes 2 water based glaze products. One is called Glacis' and it's interior/exterior. It is the product we use for marbleized effects. Assuming you're using glaze products....
Have you checked your area for faux classes? They could teach you the steps for faux finshing and save you the headaches of problem solving.I tried faux marbling a firplace mantle and the oil based paint did not adhere to my base coat.?
Yes , it would help, the problem also lies within the fact that the semi-gloss is a smooth surface so the new paint has less to 'grab' onto. I would recommend using a oil base primer, or flat low luster base coat. Also wondering why you feel necessary to use oil in the first place, it is not necessary to achieve faux effect. Benjamin Moore makes a good acrylic based enamel called IronClad that would give good results. Hope this helps.
Latex and oil base doesn't mix. You'll have to use all oil or latex.
Get some primer, Prime the area then you should be okay.
There is no reason why you have to use oil based products. There are many lines of faux products which are all water based.
Just as the user above my post said, latex and oil do not work together.
Adicolor makes 2 water based glaze products. One is called Glacis' and it's interior/exterior. It is the product we use for marbleized effects. Assuming you're using glaze products....
Have you checked your area for faux classes? They could teach you the steps for faux finshing and save you the headaches of problem solving.I tried faux marbling a firplace mantle and the oil based paint did not adhere to my base coat.?
Yes , it would help, the problem also lies within the fact that the semi-gloss is a smooth surface so the new paint has less to 'grab' onto. I would recommend using a oil base primer, or flat low luster base coat. Also wondering why you feel necessary to use oil in the first place, it is not necessary to achieve faux effect. Benjamin Moore makes a good acrylic based enamel called IronClad that would give good results. Hope this helps.
Latex and oil base doesn't mix. You'll have to use all oil or latex.
Get some primer, Prime the area then you should be okay.
I want to paint the wood floor on my uncovered deck in a faux rug design. Any suggestions? Am I crazy?
What would the process be? What paints to use, any template for a rug, preferably a simple southwestern theme? Suggested Resources?I want to paint the wood floor on my uncovered deck in a faux rug design. Any suggestions? Am I crazy?
I like it. Good idea. Make sure you use latex deck paint, and prime and/or sand if the wood under has peeling paint.You don't want to do all that work and have it peel off next year.
Find or make a design you like, pick your colours. Southwestern is a good choice as it's all straight lines. I'd do squares within squares or a series of stripes and add a few triangles here and there, that'll be simple. You could make yourself a few templates of cardboard of a few triangle sizes and put them where you like. Paint the smallest square or one colour of stripe, let it dry, do the next size square, and so on. When it's all dry enough to walk on, start setting the template where you want triangles, paint within them. Do one colour at a time, let it dry. If you want to do a strip of triangles, lay out a straight line to follow with masking tape. If you can find a clear glaze suitable for outdoors, I'd put a layer or two of that on top of the whole thing so that you don't wear through to the design and can just refresh the glaze when needed.I want to paint the wood floor on my uncovered deck in a faux rug design. Any suggestions? Am I crazy?
It's only crazy if you don't like repainting every year or two. I have yet to see a painted or stained deck that doesn't need to be redone constantly. I'd use stain, so at least it's more of a fading issue instead of a peeling issue.
Go to home depot in the paint department. They have rollers there that make different designs.
I like it. Good idea. Make sure you use latex deck paint, and prime and/or sand if the wood under has peeling paint.You don't want to do all that work and have it peel off next year.
Find or make a design you like, pick your colours. Southwestern is a good choice as it's all straight lines. I'd do squares within squares or a series of stripes and add a few triangles here and there, that'll be simple. You could make yourself a few templates of cardboard of a few triangle sizes and put them where you like. Paint the smallest square or one colour of stripe, let it dry, do the next size square, and so on. When it's all dry enough to walk on, start setting the template where you want triangles, paint within them. Do one colour at a time, let it dry. If you want to do a strip of triangles, lay out a straight line to follow with masking tape. If you can find a clear glaze suitable for outdoors, I'd put a layer or two of that on top of the whole thing so that you don't wear through to the design and can just refresh the glaze when needed.I want to paint the wood floor on my uncovered deck in a faux rug design. Any suggestions? Am I crazy?
It's only crazy if you don't like repainting every year or two. I have yet to see a painted or stained deck that doesn't need to be redone constantly. I'd use stain, so at least it's more of a fading issue instead of a peeling issue.
Go to home depot in the paint department. They have rollers there that make different designs.
Can you use a flat paint as a base and then faux with matte finish paint?
We bought an ';oops'; $5 paint at Lowes, Olympic Latex Flat Enamel paint, and want to use it as the base color for a faux paint job. For the top coat we have Sherwin-Williams Latex Matte paint. Is there any problem mixing the two finishes???Can you use a flat paint as a base and then faux with matte finish paint?
No , feel free. This is basiclly what primer is, although primer is usually a little 'stickier' than normal paint. But I have used a cheaper leftover latex as a base for a more expensive latex or acrylic many times. Works great.Can you use a flat paint as a base and then faux with matte finish paint?
Hey don't oops WalMart, you don't know who makes their paint but my painter hubby won't use anything else. I mean he was doing my serenity room in peach and Sears had paint on sale. It didn't do any better than WalMart. But, yes this will be fine.
As they are both latex paints they will be compatible with on another, but a flat enamel is new to me.
An enamel is usually gloss or semi-gloss, which could need a light scuffing with sandpaper before re coating.shell necklace
No , feel free. This is basiclly what primer is, although primer is usually a little 'stickier' than normal paint. But I have used a cheaper leftover latex as a base for a more expensive latex or acrylic many times. Works great.Can you use a flat paint as a base and then faux with matte finish paint?
Hey don't oops WalMart, you don't know who makes their paint but my painter hubby won't use anything else. I mean he was doing my serenity room in peach and Sears had paint on sale. It didn't do any better than WalMart. But, yes this will be fine.
As they are both latex paints they will be compatible with on another, but a flat enamel is new to me.
An enamel is usually gloss or semi-gloss, which could need a light scuffing with sandpaper before re coating.
I painted my trim and now my 2'; white faux wood blinds are too dark. Help! Can I paint them?
You CAN paint them but it would be a very trying process. They have paints that bond well to plastics but that will also fill in the ';natural'; appearance of the blinds. You can do a lot with spray paint or even a brush on paint, but ifyou want the strings to remain the same color, you will have to do a lot of taping. Is it really worth all that trouble? I woul djust go buy some new blinds with a complimentary color rather than repainting anything.I painted my trim and now my 2'; white faux wood blinds are too dark. Help! Can I paint them?
If they're white, how could they be too dark? You could paint them, they make paint for plastic, but it's hard to do without gumming up the working parts of the blinds. If you're careful, it might work, but probably best to buy new ones.I painted my trim and now my 2'; white faux wood blinds are too dark. Help! Can I paint them?
probably easier to repaint your trim
If they're white, how could they be too dark? You could paint them, they make paint for plastic, but it's hard to do without gumming up the working parts of the blinds. If you're careful, it might work, but probably best to buy new ones.I painted my trim and now my 2'; white faux wood blinds are too dark. Help! Can I paint them?
probably easier to repaint your trim
Easy to understand and follow Faux paint finishing ';how to crackle finish';
I've been all over the internet to find instructions. Has anyone done it, and how did you do it, step by step? I only plan on doing this on our ceiling. I just would like step by step instructions that are easy to understand and easy to follow.
Please no links to different sites unless you've used the instructions yourself and had a great outcome. ThanksEasy to understand and follow Faux paint finishing ';how to crackle finish';
Here are the basic instructions for crackle finishing -
The waiting time is the hardest thing about it - but please allow time for drying - very important
Step 1.
Using a stir stick, thoroughly stir the paint chosen for the base color (Flat, Flat Enamel, Eggshell Enamel or Satin Enamel).
TIP
We recommend you use a practice board to preview your technique and color combination before beginning your project.
Step 2.
Using a brush or a roller, apply the base-color onto the project.
Step 3.
Ensure that the base-color has dried a minimum of 4 hours.
Step 4.
Apply an even coat of Crackle liberally to the surface using a brush or a roller.
TIP
How the Crackle is applied will affect how the top coat will crack. If the Crackle was brushed, the cracks will follow the direction in which it was brushed. If the Crackle was rolled, it will achieve a more uniform effect.
Step 5.
Allow Crackle to dry a minimum of 1 hour, no longer than 7 days.
TIP
It is possible to wait as long as one week before top-coating the Crackle.
Step 6.
Using a stir stick, thoroughly stir the paint chosen for the top-coat (Flat).
TIP
For the best Crackle effect, use a Flat top-coat.
Step 7.
Apply the top-coat using a brush or a roller using as few strokes as possible.
TIP
For small cracks, apply a thin amount of the top-coat, for larger cracks, apply a heavier amount of the top-coat. The method used for applying the top-coat will affect the final look of the Crackle.
Step 8.
Allow to dry approximately 24 hours.
.
Easy to understand and follow Faux paint finishing ';how to crackle finish';
Go to any store that sells the ';crackle medium'; and read the directions. Oh, and doing a ceiling will be almost impossible.
Please no links to different sites unless you've used the instructions yourself and had a great outcome. ThanksEasy to understand and follow Faux paint finishing ';how to crackle finish';
Here are the basic instructions for crackle finishing -
The waiting time is the hardest thing about it - but please allow time for drying - very important
Step 1.
Using a stir stick, thoroughly stir the paint chosen for the base color (Flat, Flat Enamel, Eggshell Enamel or Satin Enamel).
TIP
We recommend you use a practice board to preview your technique and color combination before beginning your project.
Step 2.
Using a brush or a roller, apply the base-color onto the project.
Step 3.
Ensure that the base-color has dried a minimum of 4 hours.
Step 4.
Apply an even coat of Crackle liberally to the surface using a brush or a roller.
TIP
How the Crackle is applied will affect how the top coat will crack. If the Crackle was brushed, the cracks will follow the direction in which it was brushed. If the Crackle was rolled, it will achieve a more uniform effect.
Step 5.
Allow Crackle to dry a minimum of 1 hour, no longer than 7 days.
TIP
It is possible to wait as long as one week before top-coating the Crackle.
Step 6.
Using a stir stick, thoroughly stir the paint chosen for the top-coat (Flat).
TIP
For the best Crackle effect, use a Flat top-coat.
Step 7.
Apply the top-coat using a brush or a roller using as few strokes as possible.
TIP
For small cracks, apply a thin amount of the top-coat, for larger cracks, apply a heavier amount of the top-coat. The method used for applying the top-coat will affect the final look of the Crackle.
Step 8.
Allow to dry approximately 24 hours.
.
Easy to understand and follow Faux paint finishing ';how to crackle finish';
Go to any store that sells the ';crackle medium'; and read the directions. Oh, and doing a ceiling will be almost impossible.
I am going to paint my bedroom walls with a Faux finish. I've never done this before.?
Do you have any tips for me?I am going to paint my bedroom walls with a Faux finish. I've never done this before.?
Go to a Home Depot store or any store that sells Behr's paint. The Behr company has handouts on all the different faux finishes and Home Depot has free classes where they show you how to do it. I even bought a special paint roller that got the faux effect I wanted with almost no effort. Good luck!! : )I am going to paint my bedroom walls with a Faux finish. I've never done this before.?
there are instructions on how to do heaps of faux finishing techniques on HGTV.com:
http://www.hgtv.com/hgtv/dc_faux_finishi鈥?/a>
Go to a Home Depot store or any store that sells Behr's paint. The Behr company has handouts on all the different faux finishes and Home Depot has free classes where they show you how to do it. I even bought a special paint roller that got the faux effect I wanted with almost no effort. Good luck!! : )I am going to paint my bedroom walls with a Faux finish. I've never done this before.?
there are instructions on how to do heaps of faux finishing techniques on HGTV.com:
http://www.hgtv.com/hgtv/dc_faux_finishi鈥?/a>
I am going to paint my bedroom walls with a Faux finish. I've never done this before.?
Do you have any tips for me?I am going to paint my bedroom walls with a Faux finish. I've never done this before.?
Go to a Home Depot store or any store that sells Behr's paint. The Behr company has handouts on all the different faux finishes and Home Depot has free classes where they show you how to do it. I even bought a special paint roller that got the faux effect I wanted with almost no effort. Good luck!! : )I am going to paint my bedroom walls with a Faux finish. I've never done this before.?
there are instructions on how to do heaps of faux finishing techniques on HGTV.com:
http://www.hgtv.com/hgtv/dc_faux_finishi鈥?/a>
Go to a Home Depot store or any store that sells Behr's paint. The Behr company has handouts on all the different faux finishes and Home Depot has free classes where they show you how to do it. I even bought a special paint roller that got the faux effect I wanted with almost no effort. Good luck!! : )I am going to paint my bedroom walls with a Faux finish. I've never done this before.?
there are instructions on how to do heaps of faux finishing techniques on HGTV.com:
http://www.hgtv.com/hgtv/dc_faux_finishi鈥?/a>
Is it better to use acrylic paint to give a laminate counter a faux granite look?
How hard is it to paint over a porcelain backsplash?Is it better to use acrylic paint to give a laminate counter a faux granite look?
You will first need to sand the laminate and clean well. Apply a couple of coats of oil-based primer which can be tinted to your paint color.
Same for the porcelain.....clean well with some ammonia and wipe everything down with TSP.
http://www.thesexykitchen.com/kitchen-co鈥?/a>Is it better to use acrylic paint to give a laminate counter a faux granite look?
If your substrate is still good, you can just pick a new laminate pattern you like and have it glued on top of the old surface (if' the old laminate isn't glossy, you don't even need to sand it). My sister re-did all her kitchen cabinets and counters that way, with granite look laminate, and they look great.
I tried painting a laminate counter once -- even with good prep and paint it didn't look very authentic and it did not wear well at all.
You will need special epoxy paint for the porcelain backsplash -- regular paint won't adhere properly.
You will first need to sand the laminate and clean well. Apply a couple of coats of oil-based primer which can be tinted to your paint color.
Same for the porcelain.....clean well with some ammonia and wipe everything down with TSP.
http://www.thesexykitchen.com/kitchen-co鈥?/a>Is it better to use acrylic paint to give a laminate counter a faux granite look?
If your substrate is still good, you can just pick a new laminate pattern you like and have it glued on top of the old surface (if' the old laminate isn't glossy, you don't even need to sand it). My sister re-did all her kitchen cabinets and counters that way, with granite look laminate, and they look great.
I tried painting a laminate counter once -- even with good prep and paint it didn't look very authentic and it did not wear well at all.
You will need special epoxy paint for the porcelain backsplash -- regular paint won't adhere properly.
How/Can you splatter paint on walls as a faux finish?
I agree with Steven W. I've had many years in design and lots of experience with most of the faux finishes (at least once). Regardless of the method you use, a drop cloth is essential, and make sure anything not removed from the room is covered as well (including windows, etc). To try to ';throw'; paint on the wall is going to leave an irregular and splotchy mess and I don't think you'll be happy with the results. A slapstick will help keep the pattern more uniform thus also giving you more control assuring most of the paint you're paying for hits the wall and not the floor behind or around you.
Depending on the effect you're trying for, we do use one of those giant water guns to create a ';paintball'; effect on my grandson's wall. It's almost necessary to have several on hand unless you want to completely clean it out after using each color. We also found that to get the true ';fight'; effect, it's necessary to vary which colors overlap one another, which requires a little drying time in between some colors. Gotta say it was an interesting afternoon, but fun.How/Can you splatter paint on walls as a faux finish?
This sounds really messy.....but dip a large brush, like the kind used on the exterior of your house, hold the brush over your shoulder, and flip it quickly forward toward the wall. Of course, lots of drop cloths.....How/Can you splatter paint on walls as a faux finish?
I do this for a living.
4 inch brush or whatever you have,,, need not even be a good brush.
Decide the spatter color and dip the brush
Have a slap stick or your wrist/palm to slap the brush handle against close to the wall.
Change positions, pressure, patterns.
Start dry and gauge the effect, add more paint to suit.
Rev. Steven
Debbie Travis has a few books out, that explain alot about doing Faux finishes. You could also go to Ask.comshell necklace
Depending on the effect you're trying for, we do use one of those giant water guns to create a ';paintball'; effect on my grandson's wall. It's almost necessary to have several on hand unless you want to completely clean it out after using each color. We also found that to get the true ';fight'; effect, it's necessary to vary which colors overlap one another, which requires a little drying time in between some colors. Gotta say it was an interesting afternoon, but fun.How/Can you splatter paint on walls as a faux finish?
This sounds really messy.....but dip a large brush, like the kind used on the exterior of your house, hold the brush over your shoulder, and flip it quickly forward toward the wall. Of course, lots of drop cloths.....How/Can you splatter paint on walls as a faux finish?
I do this for a living.
4 inch brush or whatever you have,,, need not even be a good brush.
Decide the spatter color and dip the brush
Have a slap stick or your wrist/palm to slap the brush handle against close to the wall.
Change positions, pressure, patterns.
Start dry and gauge the effect, add more paint to suit.
Rev. Steven
Debbie Travis has a few books out, that explain alot about doing Faux finishes. You could also go to Ask.com
Is it possible to paint white kitchen cabinets with a faux-wood finish? if so, how?
I recently moved into my house and i have wood kitchen cabinets that were painted white. I believe they were originally oak. I would really like to paint them with a dark wood faux finish - to look similar to my cherry wood furniture. I just don't know if this is even possible! I have a little experince painting - but i've never done a faux finish before. If anyone has experince with this could they please tell me how this should be done - or if i should even attempt it at all! thanks!Is it possible to paint white kitchen cabinets with a faux-wood finish? if so, how?
Well, here is a link to Olympic Stains, where they have a video of the 'graining tool' used to create the 'faux wood grain' on a surface. http://www.ppg.com/ppgaf/olympic/igraini鈥?/a>
I would ask first tho.... are these cabinets solid wood? If they are, you might be better off stripping the existing paint, and refinishing the wood.
Reworking a kitchen can be a large task.... be sure to take all of the steps into consideration, before you start any remodeling. Things to consider are: Where are you going to do the work? Can you still use the kitchen while working on the cabinets? How much is it going to cost in time and labor? What are the costs of 'repainting' vs 'replacing'... or even simply 'refacing'?
Have Fun
Additional: Lol, well, I see I got a negative review on my answer, but that really puzzles me... I see nothing in my answer which should create that response... lol I guess someone may have been feeling grumpy, lol.
I have been a woodworker for all of my adult life...for many years, I was a production manager in the furniture industry. Very successful, I might add. So, Ive had a lot of experience, not only in the manufacturing process of woodworking, but also several related areas, such as working with various finishing methods (including faux finish, laminates, veneers, and different chemicals to use in the finishing process of actual wood). For my money... I prefer actual wood, where I can get it. Sometimes that isnt always possible, so, we have these other alternatives.
It has been my experience that faux finishing can be very realistic looking -- a lot of that depends on how much time and money you are willing to invest in the process -- you COULD end up spending more money to make a good fake, than it would be to replace it with solid wood...that is why I cautioned that it would be a good idea to compare prices.
The alternatives, as I see it, are to put the effort and expense of the faux finish process, or strip and refinish the existing doors and cabinet faces (provided they are not laminates), or replace the doors and facing, or.. last choice ... put new veneer over the old doors and facing. There are companies that specialize in manufacturing and selling just cabinet doors (and drawer fronts). There are also veneer products out there that will allow you to 'reface' a cabinet yourself, with a choice of many woodgrains, stains, etc.
The Olympic Stains site, I mentioned has a video of the 'graining tool', so often used in faux wood finishing, in actual use, showing you the technique to use, to create a realistic wood grain. I will add another link here... to Rockler Woodworkers Supply -- they have an excellent catalog, and web site. They carry many things that are useful, not only to the 'home' woodworker, but also to the 'commercial', or 'professional' woodworker. Ive done business with this company for many years, and Ive always been satisfied. Take a look at their kitchen remodeling products, and you can find some of the veneers I mentioned earlier to refinish cabinets.
http://www.rockler.com/
http://www.rockler.com/search_results.cf鈥?/a>
Have FunIs it possible to paint white kitchen cabinets with a faux-wood finish? if so, how?
The Wrangler has some really good suggestions. As a do-it-yourselfer and artist I want to add that if you do decide to either faux paint or strip your kitchen cabinets practice your skills on some thrift store furniture first. You will learn loads from it and be able to get a much better idea of how much of a project you will be taking on.
I've seen lots of books on decorating with paint that show a variety of faux paint finishes, try browsing a larger bookstore.
The concern that I would have about trying to paint them to look like your furniture is that they won't. Being next to the real wood (to my mind) will cause them to look less real in comparison. If I were going to paint them for me, I would choose a color/style that would coordinate with rather than imitate the cherry.
Good luck on your project!
Starwoode is right on the money!
i suggest stripping the paint off your cabinets and then stain them cherry. no faux painting i know of would look as good as the natural wood stained to match.
Well, here is a link to Olympic Stains, where they have a video of the 'graining tool' used to create the 'faux wood grain' on a surface. http://www.ppg.com/ppgaf/olympic/igraini鈥?/a>
I would ask first tho.... are these cabinets solid wood? If they are, you might be better off stripping the existing paint, and refinishing the wood.
Reworking a kitchen can be a large task.... be sure to take all of the steps into consideration, before you start any remodeling. Things to consider are: Where are you going to do the work? Can you still use the kitchen while working on the cabinets? How much is it going to cost in time and labor? What are the costs of 'repainting' vs 'replacing'... or even simply 'refacing'?
Have Fun
Additional: Lol, well, I see I got a negative review on my answer, but that really puzzles me... I see nothing in my answer which should create that response... lol I guess someone may have been feeling grumpy, lol.
I have been a woodworker for all of my adult life...for many years, I was a production manager in the furniture industry. Very successful, I might add. So, Ive had a lot of experience, not only in the manufacturing process of woodworking, but also several related areas, such as working with various finishing methods (including faux finish, laminates, veneers, and different chemicals to use in the finishing process of actual wood). For my money... I prefer actual wood, where I can get it. Sometimes that isnt always possible, so, we have these other alternatives.
It has been my experience that faux finishing can be very realistic looking -- a lot of that depends on how much time and money you are willing to invest in the process -- you COULD end up spending more money to make a good fake, than it would be to replace it with solid wood...that is why I cautioned that it would be a good idea to compare prices.
The alternatives, as I see it, are to put the effort and expense of the faux finish process, or strip and refinish the existing doors and cabinet faces (provided they are not laminates), or replace the doors and facing, or.. last choice ... put new veneer over the old doors and facing. There are companies that specialize in manufacturing and selling just cabinet doors (and drawer fronts). There are also veneer products out there that will allow you to 'reface' a cabinet yourself, with a choice of many woodgrains, stains, etc.
The Olympic Stains site, I mentioned has a video of the 'graining tool', so often used in faux wood finishing, in actual use, showing you the technique to use, to create a realistic wood grain. I will add another link here... to Rockler Woodworkers Supply -- they have an excellent catalog, and web site. They carry many things that are useful, not only to the 'home' woodworker, but also to the 'commercial', or 'professional' woodworker. Ive done business with this company for many years, and Ive always been satisfied. Take a look at their kitchen remodeling products, and you can find some of the veneers I mentioned earlier to refinish cabinets.
http://www.rockler.com/
http://www.rockler.com/search_results.cf鈥?/a>
Have FunIs it possible to paint white kitchen cabinets with a faux-wood finish? if so, how?
The Wrangler has some really good suggestions. As a do-it-yourselfer and artist I want to add that if you do decide to either faux paint or strip your kitchen cabinets practice your skills on some thrift store furniture first. You will learn loads from it and be able to get a much better idea of how much of a project you will be taking on.
I've seen lots of books on decorating with paint that show a variety of faux paint finishes, try browsing a larger bookstore.
The concern that I would have about trying to paint them to look like your furniture is that they won't. Being next to the real wood (to my mind) will cause them to look less real in comparison. If I were going to paint them for me, I would choose a color/style that would coordinate with rather than imitate the cherry.
Good luck on your project!
Starwoode is right on the money!
i suggest stripping the paint off your cabinets and then stain them cherry. no faux painting i know of would look as good as the natural wood stained to match.
How do I refinish a blonde veneer dresser with paint or a faux finish. Steps? Primer? Paint?
I don't think I would do alot of sanding on the dresser, because there's a risk that you may sand through the veneer. Since you're going to cover it with paint, it's not critical, but you want the finish to be smooth. I'd lightly sand with maybe a 220 grit paper. BTW, you're only sanding to remove any roughness or build-up of foreign matter.
Next, apply a quality primer made especially for glossy surfaces. There are several different brand names. Just check the label to see if it's good for glossy surfaces. I've used these primers several times with great success. (Apply to a small patch and let it dry. Afterwards, try and scratch it off with your nail. If you have the right stuff, you won't able to scratch it away.)
After the primer dries, either apply your paint, or begin the steps according to the faux finish product you're going to use. If painting it, I'd suggest you go with a gloss paint to give it a sheen. Plus, it's easier to keep clean and dust.
With the faux finish, you'll probably have to apply a base coat (on top of the primer) and then finish it with the top application according to the product's directions.
Y'know, as an after thought, you may think about using oil based paint vice water latex. Oil will have a much nicer sheen and will dry to a much smoother finish.
good luckHow do I refinish a blonde veneer dresser with paint or a faux finish. Steps? Primer? Paint?
Go to paint store, ask.How do I refinish a blonde veneer dresser with paint or a faux finish. Steps? Primer? Paint?
I will give the stepxsteps for painting as the chosen method of refinishing. By faux finish, I am assuming you mean paint effects, and after the prep has been completed you can just follow the directions included with the effects kit.
STEP 1: remove all the hardware
STEP 2: sand, sand sand the entire piece with 220 grit paper, remove sanding residue with a tack rag
STEP 3: Apply a quality primer designed for glossy surfaces (such as BIN) after the primer is completely dry, sand lightly with 320 or finer paper, again remove dust with a tack rag.
STEP 4: apply finish coat no. 1 using a quality brush (don't skimp on the brush and make sure you get the appropriate brush for the paint you are using).
STEP 5: again sand with the 320, tack off and apply coat 2, if a 3rd coat is required repeat the above step.
STEP 6: replace hardware, if you are changing the hardware and the old mounting holes need to be repaired do that before step 2, several applications of MH should do the trick (make sure there repairs are flush and smooth)
Hope this gets you started. If you need direction to refinish this piece to natural or stained wood let me know.
Next, apply a quality primer made especially for glossy surfaces. There are several different brand names. Just check the label to see if it's good for glossy surfaces. I've used these primers several times with great success. (Apply to a small patch and let it dry. Afterwards, try and scratch it off with your nail. If you have the right stuff, you won't able to scratch it away.)
After the primer dries, either apply your paint, or begin the steps according to the faux finish product you're going to use. If painting it, I'd suggest you go with a gloss paint to give it a sheen. Plus, it's easier to keep clean and dust.
With the faux finish, you'll probably have to apply a base coat (on top of the primer) and then finish it with the top application according to the product's directions.
Y'know, as an after thought, you may think about using oil based paint vice water latex. Oil will have a much nicer sheen and will dry to a much smoother finish.
good luckHow do I refinish a blonde veneer dresser with paint or a faux finish. Steps? Primer? Paint?
Go to paint store, ask.How do I refinish a blonde veneer dresser with paint or a faux finish. Steps? Primer? Paint?
I will give the stepxsteps for painting as the chosen method of refinishing. By faux finish, I am assuming you mean paint effects, and after the prep has been completed you can just follow the directions included with the effects kit.
STEP 1: remove all the hardware
STEP 2: sand, sand sand the entire piece with 220 grit paper, remove sanding residue with a tack rag
STEP 3: Apply a quality primer designed for glossy surfaces (such as BIN) after the primer is completely dry, sand lightly with 320 or finer paper, again remove dust with a tack rag.
STEP 4: apply finish coat no. 1 using a quality brush (don't skimp on the brush and make sure you get the appropriate brush for the paint you are using).
STEP 5: again sand with the 320, tack off and apply coat 2, if a 3rd coat is required repeat the above step.
STEP 6: replace hardware, if you are changing the hardware and the old mounting holes need to be repaired do that before step 2, several applications of MH should do the trick (make sure there repairs are flush and smooth)
Hope this gets you started. If you need direction to refinish this piece to natural or stained wood let me know.
How do you make faux marbelizing on inflated balloons using acrylic paints?
It seems like we took a tub of water and added a suspension agent (liquid starch maybe?) then squirted different colored acrylic paints into the liquid, briefly ';swirled'; through the liquid with a plastic spoon. Took the inflated baloon and dipped it into the liquid mixture and as you remove it, the ';marbeled'; mixture adheared to the baloon. I don't remember what the suspension agent is or ratio used.How do you make faux marbelizing on inflated balloons using acrylic paints?
I've never done it on balloons before, but I'm sure it is the same procedure you use for marbleizing paper. Here's a place that tells you how.
http://www.dickblick.com/lessonplans/200鈥?/a>
I've never done it on balloons before, but I'm sure it is the same procedure you use for marbleizing paper. Here's a place that tells you how.
http://www.dickblick.com/lessonplans/200鈥?/a>
How do you paint a FAUX crown molding to a room?
i would love to knowHow do you paint a FAUX crown molding to a room?
You can buy resin molding at Lowe's or Home depot. It is as cheap as $2 a foot.
It is white and needs painting but it is cheaper than wood.How do you paint a FAUX crown molding to a room?
Paint your walls any color you desire. Install inexpensive trim at ceiling height. Install another set if trim around the room about 6 inches below the ceiling. Paint the trim and the area between white and you have the illusion of 8-10 inch crown moulding but with far less expense. Good luck!
Why try to paint it when you can buy crown molding at Loews or Home Depot so inexpensively? Really it is not expensive. Check it out.
I wouldn't, way way to hard to make it look decent with all the highlights and shadows. If you don't want the real thing i would look for some wallpaper border to do the trick.
cover by mastic tape to side of your crown mold up%26amp;bottom
then if you have spry gun low pressure spry paint and if you don,t have spray use sharp and tiny nose handy brush .
You can buy resin molding at Lowe's or Home depot. It is as cheap as $2 a foot.
It is white and needs painting but it is cheaper than wood.How do you paint a FAUX crown molding to a room?
Paint your walls any color you desire. Install inexpensive trim at ceiling height. Install another set if trim around the room about 6 inches below the ceiling. Paint the trim and the area between white and you have the illusion of 8-10 inch crown moulding but with far less expense. Good luck!
Why try to paint it when you can buy crown molding at Loews or Home Depot so inexpensively? Really it is not expensive. Check it out.
I wouldn't, way way to hard to make it look decent with all the highlights and shadows. If you don't want the real thing i would look for some wallpaper border to do the trick.
cover by mastic tape to side of your crown mold up%26amp;bottom
then if you have spry gun low pressure spry paint and if you don,t have spray use sharp and tiny nose handy brush .
Faux finish paint on knock down (spanish lace)?
I painted the office in my house blue and I don't like it. I'm thinking maybe I'll try a faux finish over it with a darker blue but my walls are not smooth. What would be reasonably easy and look good?Faux finish paint on knock down (spanish lace)?
One of the latest techniques I've done is using 50% Luster Stone (in color of your choice) and 50% True Tint Stone from Faux Masters. Then you just brush it on in vertical strokes with a cheap old brush. It leaves a shimmering sandy finish, but looks beautiful like raw silk or linen. Everyone loved it, including all of the men that were working on the house (which I found interesting- because usually the construction workers don't have much respect for faux finishes). The Faux Masters products are rather expensive, so if cost is an issue, behr makes a texured paint for walls and ceilings with a sand finish that you could tint to your choice of color (or just paint over it- but its much easier to just tint it). You wouldn't have the beautiful shimmer that the Lusterstone gives though. So you could just buy a quart of Lusterstone and paint a thin watered down wash over the behr product. Then you wouldn't have to buy the TrueTintStone at all. The 2 gallon container of Behr is about $20 at Home Depot. This is my new favorite finish!Faux finish paint on knock down (spanish lace)?
look into a venetian plaster too. behr makes a synthetic plaster, so does modern masters. home depot, lowes and dunn edwards all carry synthetic plasters. it's hard to mess up. tint it any shade, and use a stainless steel trowel, applying 2-3 very thin coats. you can also trowel on a clear protective finish. it's a very subtle look, and the knockdown underneath it will give it an interesting look.
I did my living room in a lime wash and my hallway in a faux finish. I did it because as yourself my walls were not the best from the previous owners. It looks great when it's done, it is a bit more expensive because you need special primer etc. that goes with the faux paint. You need a special brush to make the design you want. It is a great idea to cover the walls however make sure you want to do it, because it's harder to change THAT type of paint after you do it. Try the lime wash first to lighten it up, so it looks like clouds etc. It's less expensive and you can get the look you desire. Practice first on cardboard or something but guaranteed you will like it. Go to Lowes, they have samples of what both will look like..GOOD LUCK!
One of the latest techniques I've done is using 50% Luster Stone (in color of your choice) and 50% True Tint Stone from Faux Masters. Then you just brush it on in vertical strokes with a cheap old brush. It leaves a shimmering sandy finish, but looks beautiful like raw silk or linen. Everyone loved it, including all of the men that were working on the house (which I found interesting- because usually the construction workers don't have much respect for faux finishes). The Faux Masters products are rather expensive, so if cost is an issue, behr makes a texured paint for walls and ceilings with a sand finish that you could tint to your choice of color (or just paint over it- but its much easier to just tint it). You wouldn't have the beautiful shimmer that the Lusterstone gives though. So you could just buy a quart of Lusterstone and paint a thin watered down wash over the behr product. Then you wouldn't have to buy the TrueTintStone at all. The 2 gallon container of Behr is about $20 at Home Depot. This is my new favorite finish!Faux finish paint on knock down (spanish lace)?
look into a venetian plaster too. behr makes a synthetic plaster, so does modern masters. home depot, lowes and dunn edwards all carry synthetic plasters. it's hard to mess up. tint it any shade, and use a stainless steel trowel, applying 2-3 very thin coats. you can also trowel on a clear protective finish. it's a very subtle look, and the knockdown underneath it will give it an interesting look.
I did my living room in a lime wash and my hallway in a faux finish. I did it because as yourself my walls were not the best from the previous owners. It looks great when it's done, it is a bit more expensive because you need special primer etc. that goes with the faux paint. You need a special brush to make the design you want. It is a great idea to cover the walls however make sure you want to do it, because it's harder to change THAT type of paint after you do it. Try the lime wash first to lighten it up, so it looks like clouds etc. It's less expensive and you can get the look you desire. Practice first on cardboard or something but guaranteed you will like it. Go to Lowes, they have samples of what both will look like..GOOD LUCK!
Question on painting over a faux finish?
my husband and i just bought a condo there is an accent wall in the living room that has a f aux finish its a suede look finish, the texture of the wall does not really bother me(it is rough) can i just paint over it or do i need to actually sand the wall down for the new color to actually take as the texture leaves a lot of crevasses so i hope it will cover with the new color completely, your help is appretiated.Question on painting over a faux finish?
For your new paint to adhere properly, you should sand off the suede finish, then use a good primer.Question on painting over a faux finish?
I don't see why not, but the best answer is to go to a store that sells suede paint and read the label. There should be instructions on how to do what you want.
Just paint over it, but prime it first, Kilz lates primer, to be sure it adheres, then whatever color you likeshell necklace
For your new paint to adhere properly, you should sand off the suede finish, then use a good primer.Question on painting over a faux finish?
I don't see why not, but the best answer is to go to a store that sells suede paint and read the label. There should be instructions on how to do what you want.
Just paint over it, but prime it first, Kilz lates primer, to be sure it adheres, then whatever color you like
Where in Saskatoon can I buy Valspar paint and faux finishes?
That about sums it up. The website only lists Lowes and they are all in Ontario (which honestly kind of pisses me off, like people outside of ontario don't need paint).
Or is there another kind pf paint I can buy that does faux finishes like the pearl or suede ones offered by Valspar?
ThanksWhere in Saskatoon can I buy Valspar paint and faux finishes?
I checked their site because I thought they were the Lowe's house brand but apparently they are not they do say they have independent dealers. And their locate is restricted to 5 digit zip codes so that doesn't help our Canadian friends.
You could try calling their customer service number 800-845-9061 or filling out their web form and they may be able to help you.
http://www.valspar.com/contact-us.html
Or is there another kind pf paint I can buy that does faux finishes like the pearl or suede ones offered by Valspar?
ThanksWhere in Saskatoon can I buy Valspar paint and faux finishes?
I checked their site because I thought they were the Lowe's house brand but apparently they are not they do say they have independent dealers. And their locate is restricted to 5 digit zip codes so that doesn't help our Canadian friends.
You could try calling their customer service number 800-845-9061 or filling out their web form and they may be able to help you.
http://www.valspar.com/contact-us.html
What is the best way to paint over a venetian plaster faux finish?
if it is a real plaster which was trowled on ,you will have to prime over it with a good primer like X-I-M ,then ttopcoat it with whatever you want, if is a simulated plaster which was brushed or rolled on ,just paint over it with a coat of flat paint ,then topcoat.
Painting contractor.
Painting contractor.
If I faux paint my front porch ceiling how can I protect it from the weather?
Enclose your entire house in weather wrap. That should keep the weather away.
Can you paint on a faux suede duvet cover?
Absolutely! Just make certain that you use fabric paint otherwise your paint will crack. Oh. And wash the duvet cover first but DO NOT put fabric softener in the cycle! If you do, you'll find that the paint doesn't stick well.
I've also found that when painting on fabric, especially if you're doing designs, etc., it's best to outline what you are doing first with either of the textured fabric paints first tho' I don't like the glitter kind (I prefer the pearly kind). If you outline what you want to paint, it keeps the paint from spreading out on the material or into another color. It's kinda like keeping inside the lines on a coloring book. I like using stencils for my designs and there are so many to choose from. It's really hard to muck up what you're doing when using stencils!
Have a great time painting on your duvet cover! And enjoy the new look!Can you paint on a faux suede duvet cover?
I dont know...but I want to know where in the heck you got the faux suede duvet cover...I want one!Can you paint on a faux suede duvet cover?
If you feel you must, you can, but be warned that if you use acrylic paint you'll face it cracking and making big stiff spots as it dries. You might be able to use fabric dyes or silk paints to ';paint'; your design on it, but only people who are advanced fabric painters and dyers should attempt those methods. On the other hand, what do you have to lose?
yes
try it
Sure.....use fabric paints. You can find them in most arts %26amp; crafts stores. Some big stores like K-Mart and Walmart might carry them also.
I've also found that when painting on fabric, especially if you're doing designs, etc., it's best to outline what you are doing first with either of the textured fabric paints first tho' I don't like the glitter kind (I prefer the pearly kind). If you outline what you want to paint, it keeps the paint from spreading out on the material or into another color. It's kinda like keeping inside the lines on a coloring book. I like using stencils for my designs and there are so many to choose from. It's really hard to muck up what you're doing when using stencils!
Have a great time painting on your duvet cover! And enjoy the new look!Can you paint on a faux suede duvet cover?
I dont know...but I want to know where in the heck you got the faux suede duvet cover...I want one!Can you paint on a faux suede duvet cover?
If you feel you must, you can, but be warned that if you use acrylic paint you'll face it cracking and making big stiff spots as it dries. You might be able to use fabric dyes or silk paints to ';paint'; your design on it, but only people who are advanced fabric painters and dyers should attempt those methods. On the other hand, what do you have to lose?
yes
try it
Sure.....use fabric paints. You can find them in most arts %26amp; crafts stores. Some big stores like K-Mart and Walmart might carry them also.
I have a red walls in my guest bath, how should I paint it with a faux finish?
My bath has red walls (Sherwin Williams Red Bay, Satin). I would like to have the overall effect of red walls, but I would like to add some interest to the walls with a faux finish, using the Red Bay color as a basecoat. Any suggestions on what to do from here???I have a red walls in my guest bath, how should I paint it with a faux finish?
Glaze over it with burnt umber to create a leather affect. I just did this on the ceiling of my family room. Staple plastic bags over a roller leaving many wrinkles for interest. Mix a glaze of one part water, one part acylic or latex paint and one part Floetrol (available at the home improvement stores in the paint aisle.) Dip the roller in and allow excess to drip off. Roll onto the walls in an erratic pattern. Allow to dry and viola, a wonderful look of old leather.
Another technique I have used over red is to rag antique gold over it. In the old days, European artisans gold leafed over a red base on moldings, plaster and walls. You can create the same effect by ragging gold over your red. It is particularly nice in bathrooms and gives a real jewel box affect.I have a red walls in my guest bath, how should I paint it with a faux finish?
Use liquid sand to remove the shine, then apply your finish with a sponge roller for this purpose, after your finish drys cover ever thing with a clear gloss coat to seal and protect the paint and walls from the wet conditions that exist in the room.
i would say do the leather effect with the burnt umber also. Another suggestion is to use silver or white to either do a light wash (use a flexible 10 or 12'; drywall taping knife or wide paint edging pad to apply the paint mixed with glaze to the red walls) or stencil some BIG BOLD repeating pattern on your walls and paint white on your trim and door.
Glaze over it with burnt umber to create a leather affect. I just did this on the ceiling of my family room. Staple plastic bags over a roller leaving many wrinkles for interest. Mix a glaze of one part water, one part acylic or latex paint and one part Floetrol (available at the home improvement stores in the paint aisle.) Dip the roller in and allow excess to drip off. Roll onto the walls in an erratic pattern. Allow to dry and viola, a wonderful look of old leather.
Another technique I have used over red is to rag antique gold over it. In the old days, European artisans gold leafed over a red base on moldings, plaster and walls. You can create the same effect by ragging gold over your red. It is particularly nice in bathrooms and gives a real jewel box affect.I have a red walls in my guest bath, how should I paint it with a faux finish?
Use liquid sand to remove the shine, then apply your finish with a sponge roller for this purpose, after your finish drys cover ever thing with a clear gloss coat to seal and protect the paint and walls from the wet conditions that exist in the room.
i would say do the leather effect with the burnt umber also. Another suggestion is to use silver or white to either do a light wash (use a flexible 10 or 12'; drywall taping knife or wide paint edging pad to apply the paint mixed with glaze to the red walls) or stencil some BIG BOLD repeating pattern on your walls and paint white on your trim and door.
How do I paint fake crown molding (faux finish)?
If there is a website that shows you how to paint it so that it looks real, let me know.How do I paint fake crown molding (faux finish)?
create your own tool to painti t with . Buy a couple of medium sponges and fold them and cut small parts out about 1/2 of the way through the thickness so that it is various shpes and sizes of holes.
Then take some of your main color and add white to it so itis about a 1/4 od the shade. then use a third color to sponge on also.
the trick is not to get to dark with your shades and stay in the same tones. like mine recent one was pale green, beige and tan they alll mix nicely, paint the area with the main color then sponge the other two colors over until it looks how you wan ti to be sure to let it fry before you decide to add more.shell necklace
create your own tool to painti t with . Buy a couple of medium sponges and fold them and cut small parts out about 1/2 of the way through the thickness so that it is various shpes and sizes of holes.
Then take some of your main color and add white to it so itis about a 1/4 od the shade. then use a third color to sponge on also.
the trick is not to get to dark with your shades and stay in the same tones. like mine recent one was pale green, beige and tan they alll mix nicely, paint the area with the main color then sponge the other two colors over until it looks how you wan ti to be sure to let it fry before you decide to add more.
I have plywood floors in our cabin,I want to faux paint the floors to look like finished planks.Need help!?
I have faux painted my walls to look like logs, I am sure someone can help me figure out how to faux paint the floors to look like planks and save alot of money that I don't have.I have plywood floors in our cabin,I want to faux paint the floors to look like finished planks.Need help!?
You can do it, it is timely, but you can do it. Try finding a pattern you like, I copied mine from some contact paper that had a wood plank grain. A cheaper and easier alternative is the snap together hardwood, or laminate flooring you can buy and install yourself cheaply and easily. Laminate goes for as low as .90 cents per square foot, and hardwoods start as low as $1.30 per square foot. Cheap when you consider the amount of work that hand painting faux wood surfaces can take. Not to mention walls don't receive much wear, so a painted faux surface can last for years. Painting faux wood on floors will not last long, perhaps months or days. Laminate flooring is guaranteed against visible wear for years. Cheap, and easy, just like me.I have plywood floors in our cabin,I want to faux paint the floors to look like finished planks.Need help!?
I saw this done in a magazine once, can't remember which. They drew floor planks on the plywood with a permanent marker. They staggered them and even drew dots where the nails would be on real planks. They said that if you wanted, to fill in real nail holes in with wood putty and smooth. Then they beat up the plywood by dropping things on it, hit it with a hammer, just generally roughed it up to look like an old floor. Then they put several layers of polyurethane on it, drying 24 hrs. between coats. It really looked good!
if you mix a little paint thinner in wiyh your stain, it will give the appearance of woodgrain.
Try www.HGTV.com and the diy network - I'm pretty sure I've seen instructions for using plywood and routing the grooves so it'll look like hardwoods/plank flooring.
You can do it, it is timely, but you can do it. Try finding a pattern you like, I copied mine from some contact paper that had a wood plank grain. A cheaper and easier alternative is the snap together hardwood, or laminate flooring you can buy and install yourself cheaply and easily. Laminate goes for as low as .90 cents per square foot, and hardwoods start as low as $1.30 per square foot. Cheap when you consider the amount of work that hand painting faux wood surfaces can take. Not to mention walls don't receive much wear, so a painted faux surface can last for years. Painting faux wood on floors will not last long, perhaps months or days. Laminate flooring is guaranteed against visible wear for years. Cheap, and easy, just like me.I have plywood floors in our cabin,I want to faux paint the floors to look like finished planks.Need help!?
I saw this done in a magazine once, can't remember which. They drew floor planks on the plywood with a permanent marker. They staggered them and even drew dots where the nails would be on real planks. They said that if you wanted, to fill in real nail holes in with wood putty and smooth. Then they beat up the plywood by dropping things on it, hit it with a hammer, just generally roughed it up to look like an old floor. Then they put several layers of polyurethane on it, drying 24 hrs. between coats. It really looked good!
if you mix a little paint thinner in wiyh your stain, it will give the appearance of woodgrain.
Try www.HGTV.com and the diy network - I'm pretty sure I've seen instructions for using plywood and routing the grooves so it'll look like hardwoods/plank flooring.
What are some good tips on how to decoratively paint your walls? Non Faux styles please!?
I don't like a plain colored wall. Any ideas?What are some good tips on how to decoratively paint your walls? Non Faux styles please!?
yes, darling...check your email...thanks for the 2 pts and the 10sWhat are some good tips on how to decoratively paint your walls? Non Faux styles please!?
Divide into panels and paint accordingly. Plant on timber mouldings and paint in three shades: Sort of thing John Fowler used to do with National Trust Houses.
I have seen effects of graduated colour from top to bottom, but always looks too reminiscent of rising damp. Horizontal (or verical stripes) can look quite impressive, agin depending on the style of your room. Or a fuso machine finish very popular in the 30's (produces a sort of speckled effect) which you can use dramatic colour combinations.
You might use the trick my mother did for decorating the rooms of the kids with their changing tastes - she used a highly figurative wall paper (dragons, fighter jets, airplanes, horses) on one wall that was not the largest but was easy to cover and visible (like behind the bureau, behind the bed) while using more neutral or mixed colors that go well with others.
yes, darling...check your email...thanks for the 2 pts and the 10sWhat are some good tips on how to decoratively paint your walls? Non Faux styles please!?
Divide into panels and paint accordingly. Plant on timber mouldings and paint in three shades: Sort of thing John Fowler used to do with National Trust Houses.
I have seen effects of graduated colour from top to bottom, but always looks too reminiscent of rising damp. Horizontal (or verical stripes) can look quite impressive, agin depending on the style of your room. Or a fuso machine finish very popular in the 30's (produces a sort of speckled effect) which you can use dramatic colour combinations.
You might use the trick my mother did for decorating the rooms of the kids with their changing tastes - she used a highly figurative wall paper (dragons, fighter jets, airplanes, horses) on one wall that was not the largest but was easy to cover and visible (like behind the bureau, behind the bed) while using more neutral or mixed colors that go well with others.
Paint question: Bellagio faux with metallic-how do you mix it?
Behr makes this paint and their guide is unclear.
If you have experience with this paint, please clue me in.
Thanks.Paint question: Bellagio faux with metallic-how do you mix it?
i only use sherwin williams or ben. moore...sorry
If you have experience with this paint, please clue me in.
Thanks.Paint question: Bellagio faux with metallic-how do you mix it?
i only use sherwin williams or ben. moore...sorry
I have a black wooden mirror that I want to paint or put a faux finish on. How would I go about doing this?
I would like it to not be so black and maybe could put an antique bronze glaze or something on it. I just have too much black furniture in my house as it is. I want to soften it up.I have a black wooden mirror that I want to paint or put a faux finish on. How would I go about doing this?
Prime the wood, give it a coat of a rusty flat red latex, then paint it with a bronze color.
Here is a great company that makes an amazing range of metallics...
http://www.modernmastersinc.com/product_鈥?/a>I have a black wooden mirror that I want to paint or put a faux finish on. How would I go about doing this?
Clean it (dust etc) then paint over it carefully with latex paint-probably a bronnze color as you say then get the crackle medium tin from the paint store and put that over the paint
i t will crackle and look great and really old
The best way is to take it apart and remove the glass first. That way you can work on the frame without the need for masking. You should first sand down the finish or strip it to make the new paint or stain adhere better. Putting a primer coat on first will help to ensure the black covers better. Also plan on putting multiple coats on in order to acheive your best color change.
Go to your local Home Depot store, inquire about techniques.
Cover the edges of the glass with masking tape before.
If Home Depot no help, try Michael's Craft courses.
If you sand it lightly and sponge on the glaze it will turn out nice.
Prime the wood, give it a coat of a rusty flat red latex, then paint it with a bronze color.
Here is a great company that makes an amazing range of metallics...
http://www.modernmastersinc.com/product_鈥?/a>I have a black wooden mirror that I want to paint or put a faux finish on. How would I go about doing this?
Clean it (dust etc) then paint over it carefully with latex paint-probably a bronnze color as you say then get the crackle medium tin from the paint store and put that over the paint
i t will crackle and look great and really old
The best way is to take it apart and remove the glass first. That way you can work on the frame without the need for masking. You should first sand down the finish or strip it to make the new paint or stain adhere better. Putting a primer coat on first will help to ensure the black covers better. Also plan on putting multiple coats on in order to acheive your best color change.
Go to your local Home Depot store, inquire about techniques.
Cover the edges of the glass with masking tape before.
If Home Depot no help, try Michael's Craft courses.
If you sand it lightly and sponge on the glaze it will turn out nice.
My back splash is ugly horrible faux brick panels. should I paint them or do a venetian plaster faux finish?
Instructions and pics with suggestions will be appreciated. Remember this girl doesn't have Trump money.My back splash is ugly horrible faux brick panels. should I paint them or do a venetian plaster faux finish?
You can paint them. I would use an enamel paint so it can be washed.My back splash is ugly horrible faux brick panels. should I paint them or do a venetian plaster faux finish?
That depends on many factors: What type of decor is your house? What colours are in your kitchen? What other rooms are seen from the space, etc? What type of ';panels'; are these exactly??? Are they a sort of OSB board, or panels of a brick veneer?
Although those factors may make a difference... a painted brick back-splash can look very 'chic'. A creamy, off-white neutral looks really nice, and its also very versatile.
However, if you mean a board-type panelling, that is not actual brick or brick veneer, then I would take it down and tile or do a venetian plaster finish.
Also, If it is only a panel-type board I would recommend taking it down and using a sheet-rock gypsum board backing. (Two reasons: 1: Panelling is not as strong as a GB backing, and if you are spending the money on venetian plaster you want it to last... 2: Sheetrock GB backing is recommended/required in areas common to moisture (ie: kitchens and baths). It is also incredibly strong and will not promote mold growth.)
Hopefully this helps!
Can't you pull them off then do your faux plaster finish? That way you don't have to worry about sanding the area.
Regardless, if you are doing a faux plaster finish anyway, having the bricks up or not is not going to make a difference other than it will be heavy and there is a chance the plaster will pull the bricks off.
If its possible to take the brick down, the do it. If not, then yes venetian plaster will do the job.. We put it in a bathroom covering all of the walls.
While it is heavy, its not so heavy that its going to pull down your panels and it does stand up well to dampness.
I used Behr venetian plaster and they give some great directions and photos on their site.
http://www.behr.com/behrx/expert/activit鈥?/a>
You can paint them. I would use an enamel paint so it can be washed.My back splash is ugly horrible faux brick panels. should I paint them or do a venetian plaster faux finish?
That depends on many factors: What type of decor is your house? What colours are in your kitchen? What other rooms are seen from the space, etc? What type of ';panels'; are these exactly??? Are they a sort of OSB board, or panels of a brick veneer?
Although those factors may make a difference... a painted brick back-splash can look very 'chic'. A creamy, off-white neutral looks really nice, and its also very versatile.
However, if you mean a board-type panelling, that is not actual brick or brick veneer, then I would take it down and tile or do a venetian plaster finish.
Also, If it is only a panel-type board I would recommend taking it down and using a sheet-rock gypsum board backing. (Two reasons: 1: Panelling is not as strong as a GB backing, and if you are spending the money on venetian plaster you want it to last... 2: Sheetrock GB backing is recommended/required in areas common to moisture (ie: kitchens and baths). It is also incredibly strong and will not promote mold growth.)
Hopefully this helps!
Can't you pull them off then do your faux plaster finish? That way you don't have to worry about sanding the area.
Regardless, if you are doing a faux plaster finish anyway, having the bricks up or not is not going to make a difference other than it will be heavy and there is a chance the plaster will pull the bricks off.
If its possible to take the brick down, the do it. If not, then yes venetian plaster will do the job.. We put it in a bathroom covering all of the walls.
While it is heavy, its not so heavy that its going to pull down your panels and it does stand up well to dampness.
I used Behr venetian plaster and they give some great directions and photos on their site.
http://www.behr.com/behrx/expert/activit鈥?/a>
What kind of glaze is best for applying to tape to ensure a straight paint line? Faux glaze or painters caulk
I have textured walls and have trouble with paint bleeding around the tape. I've seen reports that glazing over the tape works well, but I'm not sure what kind of glaze to use - is this the same glaze that is used for faux painting? Is the glaze clear? I'm a novice painter so would appreciate any advice.What kind of glaze is best for applying to tape to ensure a straight paint line? Faux glaze or painters caulk
The best thing to do is to paint the tape with the other color first. If it bleeds then it doesn't matter. Wait for it to dry and then use the color you want.What kind of glaze is best for applying to tape to ensure a straight paint line? Faux glaze or painters caulk
Anything clear will work. I have seen them use paintable caulk. Fauxing glaze is VERY expensive.shell necklace
The best thing to do is to paint the tape with the other color first. If it bleeds then it doesn't matter. Wait for it to dry and then use the color you want.What kind of glaze is best for applying to tape to ensure a straight paint line? Faux glaze or painters caulk
Anything clear will work. I have seen them use paintable caulk. Fauxing glaze is VERY expensive.
How do you remove and paint over faux marble?
I have two side tables that have a ugly off white ';faux marble'; surface (the legs are really beautiful wood). I want to paint over the surface, but I do not know where to start. Should I sand off the original finish? or should I just paint right over it? I am not certain what exactly the surfaces are or how they were made but they look like fake marble, just not pretty!
Any suggestions? Thanks.How do you remove and paint over faux marble?
I would go and get some advice from the people in your local DIY/hardware store. In my experience they're usually a fund of knowledge on such things.How do you remove and paint over faux marble?
Heres your proceedure:
inspect the surface to see if there has been texture left from the faux proceedure. if so, sand to eliminate it or at least reduce it. If its smooth to your satisfaction then you can paint right over top.
similar materials bond, so as long as the existiing paint is in good shape, you can go right over top. If the existing surface is hard and slick its recommended to lightly sand and prime before topcoating (for adhesion purposes)
It really depends on what the surface is made of. If it's a wood laminate, which it sounds like it most likely is, then just give it a light sanding, then prime and paint it with either a semi-gloss or high-gloss paint as these are going to be the most durable for furniture.
The guy above me is not all that smart, he should of told you to go to your local Home Depot...Make sure you ask Homer de Poe for Joey orange paint
You like the legs, find a new top
Any suggestions? Thanks.How do you remove and paint over faux marble?
I would go and get some advice from the people in your local DIY/hardware store. In my experience they're usually a fund of knowledge on such things.How do you remove and paint over faux marble?
Heres your proceedure:
inspect the surface to see if there has been texture left from the faux proceedure. if so, sand to eliminate it or at least reduce it. If its smooth to your satisfaction then you can paint right over top.
similar materials bond, so as long as the existiing paint is in good shape, you can go right over top. If the existing surface is hard and slick its recommended to lightly sand and prime before topcoating (for adhesion purposes)
It really depends on what the surface is made of. If it's a wood laminate, which it sounds like it most likely is, then just give it a light sanding, then prime and paint it with either a semi-gloss or high-gloss paint as these are going to be the most durable for furniture.
The guy above me is not all that smart, he should of told you to go to your local Home Depot...Make sure you ask Homer de Poe for Joey orange paint
You like the legs, find a new top
Can you paint a faux mable vanity top in the bathroom?
I have in my bathroom a one piece vanity top with the sink all one piece. It is a ugly faux yellowish mable. I know you can paint ceramic tiles in the shower but can you you paint or somehow refinsh these?Can you paint a faux mable vanity top in the bathroom?
THAY CAN BE RE FINISHED, CHECH THE HOME SHOWS
OR JERK IT, TILE IT %26amp; DROP IN A SINK!
THAY CAN BE RE FINISHED, CHECH THE HOME SHOWS
OR JERK IT, TILE IT %26amp; DROP IN A SINK!
How do you paint a faux suede look on your walls?
I have a 2-story foyer and I'm wanting to paint it in a cream and taupe color and go with black accents on the wall. How would that look?How do you paint a faux suede look on your walls?
hard to say from a distance..specially we don't know the surroundings. since it is a foyer area -- warm colours would be best -- black is not recommended. good look and good luck.How do you paint a faux suede look on your walls?
Ah.. the faux suede.. Go to your Home Depot and they have pictures in their paint department on faux finishing and one of those faux finishes is SUEDE. a very pretty result.. They even have (as they have here) a video that you can see right there on how to do it
Ralph Lauren paint has faux suede, at least they did a few years ago.
hard to say from a distance..specially we don't know the surroundings. since it is a foyer area -- warm colours would be best -- black is not recommended. good look and good luck.How do you paint a faux suede look on your walls?
Ah.. the faux suede.. Go to your Home Depot and they have pictures in their paint department on faux finishing and one of those faux finishes is SUEDE. a very pretty result.. They even have (as they have here) a video that you can see right there on how to do it
Ralph Lauren paint has faux suede, at least they did a few years ago.
Is faux paint now considered ';out of style';?
Seemed to be very popular over the past few years, but I've been told the look is no longer ';in.';Is faux paint now considered ';out of style';?
Do you like it? Do it.
Don't like it? Don't do it.
After all, you live there, too.Is faux paint now considered ';out of style';?
Like the others said, styles come and go. Although some of the faux styles like marbelling aren't at the height of their popularity now, there are other new things available. There are lots of new metallic paints that can look great as an accent wall. And for specific projects, there is chalkboard paint. Also, some of the less intricate paint techniques like stria, and tone on tone stripes could still look great.
Not if it's done well... I was looking at houses and noticed a big difference. If the technique is done well, I think it looks gorgeous. But you could also tell which ones were done by someone without a good eye. When it's not done right, I think it looks atrocious!
it seems to be judging from the home decorating TV shows I watch.
Now the trend is for paint techniques such as French plaster. (Which will be a nightmare to paint over once it is out of style, since if it's done right it involves putting wax on the walls.)
OMG Jason gave the best answer. Also remember styles can and do come back
Also, did you know that faux marble and faux wood sometimes look shockingly real?
Not in the least. We do faux finish installs and we also teach classes on faux finishing. There are only a couple of techniques that we are seeing less of over the last 5 years, torn paper and tissue seem to be less in demand.
Do you like it? Do it.
Don't like it? Don't do it.
After all, you live there, too.Is faux paint now considered ';out of style';?
Like the others said, styles come and go. Although some of the faux styles like marbelling aren't at the height of their popularity now, there are other new things available. There are lots of new metallic paints that can look great as an accent wall. And for specific projects, there is chalkboard paint. Also, some of the less intricate paint techniques like stria, and tone on tone stripes could still look great.
Not if it's done well... I was looking at houses and noticed a big difference. If the technique is done well, I think it looks gorgeous. But you could also tell which ones were done by someone without a good eye. When it's not done right, I think it looks atrocious!
it seems to be judging from the home decorating TV shows I watch.
Now the trend is for paint techniques such as French plaster. (Which will be a nightmare to paint over once it is out of style, since if it's done right it involves putting wax on the walls.)
OMG Jason gave the best answer. Also remember styles can and do come back
Also, did you know that faux marble and faux wood sometimes look shockingly real?
Not in the least. We do faux finish installs and we also teach classes on faux finishing. There are only a couple of techniques that we are seeing less of over the last 5 years, torn paper and tissue seem to be less in demand.
How do I faux paint slate?
I'm painting on wood, and I'd like to make it look like slate. Any suggestions, directions, or resources? ThanksHow do I faux paint slate?
oh boy, it's been a few years since i did a faux, but when i did, i tried 'em all and found the best looking and easiest to do was to get a base paint that covers everything else (like kilz, but thick) and have them mix the lightest color you will use, like med-dark grey. then get a wood stain in the darkest color, like black or dark blue. i know.... it's going over paint.... so what? it works! so when you say slate, i'm not sure if you want grey look or black look? Anyway, once you've painted everything with the base paint and let it dry, you take a cheap small natural brush and gently paint a thin layer over the base paint with the wood stain to make your texture. do a small area where it's not so noticed and see what texture is missing after. then go to an arts and crafts store like pearl and they have all kinds of faux tools that you use while stain is wet to get the deepest textures. If you mess up, don't worry, just apply more stain ride away and use your texture tool again and it's fixed. be sloppy with the painting, staining and tools and it looks even better.
when you're done, let it dry a day and take a small dab of stain on the brush and quickly paint back %26amp; forth over your work. keep going back and forth briskly even after the brush dries out. this will thin out the layer and soften the look so it doesn't look fake. only get another dab of stain on brush when you move to next section. You can do a bit of this just after you faux as well. while it is still wet, but be careful.
so now you're done. won't wash off. don't have to redo EVER unless you chip it, then dab some stain where it's chipped.
on second thought, go to craft store first. it may be easier that way and make sure to ask for paint that can be stained, oil i think.
good luck.....jtHow do I faux paint slate?
DIY Network TV website they have a whole series on faux painting and how to's
oh boy, it's been a few years since i did a faux, but when i did, i tried 'em all and found the best looking and easiest to do was to get a base paint that covers everything else (like kilz, but thick) and have them mix the lightest color you will use, like med-dark grey. then get a wood stain in the darkest color, like black or dark blue. i know.... it's going over paint.... so what? it works! so when you say slate, i'm not sure if you want grey look or black look? Anyway, once you've painted everything with the base paint and let it dry, you take a cheap small natural brush and gently paint a thin layer over the base paint with the wood stain to make your texture. do a small area where it's not so noticed and see what texture is missing after. then go to an arts and crafts store like pearl and they have all kinds of faux tools that you use while stain is wet to get the deepest textures. If you mess up, don't worry, just apply more stain ride away and use your texture tool again and it's fixed. be sloppy with the painting, staining and tools and it looks even better.
when you're done, let it dry a day and take a small dab of stain on the brush and quickly paint back %26amp; forth over your work. keep going back and forth briskly even after the brush dries out. this will thin out the layer and soften the look so it doesn't look fake. only get another dab of stain on brush when you move to next section. You can do a bit of this just after you faux as well. while it is still wet, but be careful.
so now you're done. won't wash off. don't have to redo EVER unless you chip it, then dab some stain where it's chipped.
on second thought, go to craft store first. it may be easier that way and make sure to ask for paint that can be stained, oil i think.
good luck.....jtHow do I faux paint slate?
DIY Network TV website they have a whole series on faux painting and how to's
How to paint Faux Worn Brick & Worn Sheetrock?
I am looking for info on painting a FAUX worn brick and sheetrock in several places in my new home. Any one with a resource that can teach me how to do this. Googled and found Painters that do FAUX but I would like to do it my self.
ThanksHow to paint Faux Worn Brick %26amp; Worn Sheetrock?
http://www.fauxfun.com/Videos/RocksBlock鈥?/a>
the brick is easy, paint on your mortar color(s) then tape over to make bricks. Sponge on your colors for the brick. remove tape.
Torn sheetrock, that's a bit more freehand. I don't know if this site goes into that.How to paint Faux Worn Brick %26amp; Worn Sheetrock?
There are many ways to vary this technique, and it really is a good idea to practice first. Here is a guide of some effects that you can achieve
Use some primer then do your thing..........
you can use large sponges and several shades of red or gray to create a faux brick look.
It's just very difficult to try and give instructions in text.
Have you checked your area for hands on classes?microsoft web hosting
ThanksHow to paint Faux Worn Brick %26amp; Worn Sheetrock?
http://www.fauxfun.com/Videos/RocksBlock鈥?/a>
the brick is easy, paint on your mortar color(s) then tape over to make bricks. Sponge on your colors for the brick. remove tape.
Torn sheetrock, that's a bit more freehand. I don't know if this site goes into that.How to paint Faux Worn Brick %26amp; Worn Sheetrock?
There are many ways to vary this technique, and it really is a good idea to practice first. Here is a guide of some effects that you can achieve
Use some primer then do your thing..........
you can use large sponges and several shades of red or gray to create a faux brick look.
It's just very difficult to try and give instructions in text.
Have you checked your area for hands on classes?
I need some ideas to liven up the ceiling in a master bedrm. Painted faux tray ceiling instructions, too.?
would prefer inexpensive alternatives to crown molding, or ideas that could be done with paint or readily available products.I need some ideas to liven up the ceiling in a master bedrm. Painted faux tray ceiling instructions, too.?
How about EZ, cheap and fast. You need joint compound, a paint roller with extension handle, and a stomp brush (avail at home depot, Lowe's, etc.) You add water and mix the joint compound in a large tub until it is the consistency of thick paint. Roll on a 10 ft X 10 ft square at a time and stomp a random pattern into it. Then do another 10 X 10. It is best to roll the mud one direction, then the other so it is an even coat. I do this to million dollar houses for a living.I need some ideas to liven up the ceiling in a master bedrm. Painted faux tray ceiling instructions, too.?
a nice mixture of soft blue and clouds. really brightens a room too
i love sponge painting.. it can add a lot of flavor to a room.. also, try doing your ceiling in a matching but different shade then the walls. i did and it looks great! i get compliments all the time on the painting in my master bedroom
an 8x8 foot mirror on the ceiling should do it. Ad a stripper pole off to the side.
most faux painting can not be taught by reading. It takes practice to master a really nice effect. (i hate sponges, lol)
That being said, when you find your technique you want to do, I have found a popular thing to do is to do the faux technnique on the main wall in the bedroom, such as behind the bed, and also a border around the room. to do the border, measure down the distance you want from the ceiling, such as 8-10 inches. Mark it with PENCIL every few feet around the room. Then take some blue painters tape and tape evenly below the marks around the room. Now do your technique around the room, and when it dries pull the tape off slowly. You may have to touch up the wall in a few places, but the blue tape usually comes off easy.
Well, you can always put up wall paper...
(Serious!)...
I have seen beautiful ceilings with wall paper borders all along the edges, and working thier way towards the middle...
Beautiful artwork and techniqes can be done this way, and you can pick them up at a bargain at odd lots, or some remnants from other places, that would go nicely together.
(Make sure you lay them out first, on the floor, to see what they would look like, before you put on the ceiling, because once there, your stuck until the next ';remodel'; job...
Also, the crown molding is pretty cheap now, with this new plastic molded jobs. I have seen them with ';lights'; in the back of them, (actually Christmas lights are in back and the crown molding is screwed on so that they can be serviced if they blow out a bulb!)...
Wonderful things, if your inventive enough...
I wish you well..
Jesse
here is what I did if you want a sort of antique look take an old wagon wheel and wire the fan in to it. works good for a light as well.
How about EZ, cheap and fast. You need joint compound, a paint roller with extension handle, and a stomp brush (avail at home depot, Lowe's, etc.) You add water and mix the joint compound in a large tub until it is the consistency of thick paint. Roll on a 10 ft X 10 ft square at a time and stomp a random pattern into it. Then do another 10 X 10. It is best to roll the mud one direction, then the other so it is an even coat. I do this to million dollar houses for a living.I need some ideas to liven up the ceiling in a master bedrm. Painted faux tray ceiling instructions, too.?
a nice mixture of soft blue and clouds. really brightens a room too
i love sponge painting.. it can add a lot of flavor to a room.. also, try doing your ceiling in a matching but different shade then the walls. i did and it looks great! i get compliments all the time on the painting in my master bedroom
an 8x8 foot mirror on the ceiling should do it. Ad a stripper pole off to the side.
most faux painting can not be taught by reading. It takes practice to master a really nice effect. (i hate sponges, lol)
That being said, when you find your technique you want to do, I have found a popular thing to do is to do the faux technnique on the main wall in the bedroom, such as behind the bed, and also a border around the room. to do the border, measure down the distance you want from the ceiling, such as 8-10 inches. Mark it with PENCIL every few feet around the room. Then take some blue painters tape and tape evenly below the marks around the room. Now do your technique around the room, and when it dries pull the tape off slowly. You may have to touch up the wall in a few places, but the blue tape usually comes off easy.
Well, you can always put up wall paper...
(Serious!)...
I have seen beautiful ceilings with wall paper borders all along the edges, and working thier way towards the middle...
Beautiful artwork and techniqes can be done this way, and you can pick them up at a bargain at odd lots, or some remnants from other places, that would go nicely together.
(Make sure you lay them out first, on the floor, to see what they would look like, before you put on the ceiling, because once there, your stuck until the next ';remodel'; job...
Also, the crown molding is pretty cheap now, with this new plastic molded jobs. I have seen them with ';lights'; in the back of them, (actually Christmas lights are in back and the crown molding is screwed on so that they can be serviced if they blow out a bulb!)...
Wonderful things, if your inventive enough...
I wish you well..
Jesse
here is what I did if you want a sort of antique look take an old wagon wheel and wire the fan in to it. works good for a light as well.
Could you tell me what the function the GLAZE have in faux painting techniques?
First, how is GLAZE important when mixing it with regular paint? Does it make the paint more manageable? I would like to do either a lime wash or a color wash on my wall, and I see that it is strongly recommended to use GLAZE.
Another thing. It seems to me that the GLAZE is white. So, when mixing this with your paint, wouldn't it dilute the color of the paint and make it lighter?
Please, someone who knows about these things, please provide me with productive answers. I don't care how long or detailed your answers are, but I need to know these things before going and spending money on these products.
Thank you!!Could you tell me what the function the GLAZE have in faux painting techniques?
Glaze is white in the container, but dries clear, thereby not affecting the color of the paint. It's mixed 1 part paint to 4 parts glaze. It makes the paint thin enough to create the effects desired. Solid paint would be too opaque to work. Make sure you a base color with sheen, such as satin. Faux finish doesn't work well at all on a flat base. Hope this helps.
Another thing. It seems to me that the GLAZE is white. So, when mixing this with your paint, wouldn't it dilute the color of the paint and make it lighter?
Please, someone who knows about these things, please provide me with productive answers. I don't care how long or detailed your answers are, but I need to know these things before going and spending money on these products.
Thank you!!Could you tell me what the function the GLAZE have in faux painting techniques?
Glaze is white in the container, but dries clear, thereby not affecting the color of the paint. It's mixed 1 part paint to 4 parts glaze. It makes the paint thin enough to create the effects desired. Solid paint would be too opaque to work. Make sure you a base color with sheen, such as satin. Faux finish doesn't work well at all on a flat base. Hope this helps.
Painting over a faux finish paint??
Our room was originally painted with Behr faux finish paint... We decided that we were going to change the room color it was a burnt orange now Burgundy so there was no issue with the color covering the old well it is not going on well and is peeling like it does not want to stick should we have primed first the faux finish had a glaze you had to use on top is that why it would not be sticking??Painting over a faux finish paint??
Hi, I actually work at Home depot. lol So I deal with Behr Faux Finish. You should have primed it def! Use the Kilz Primer and Sealer or whatever Paint your going to use get that products primer and have it tinted as much as possible to the color your doing to help reduce your topcoats! Reason to prime bottom line, paint doesn't expect another layer there, primer does so it can be described as double sided tape. It adheres whatever is applied on top of it.
Since you have done it and it's not sticking. If it's peeling you will have to sand. Not fun, but honestly.....Sand, Clean it up good from the grit, Prime, then paint.
Just something to remember: Knowledge
1. If you ever do a big color change, get a tinted primer to what your painting with.
2. If you ever use a semi-gloss or something with sheen and then do a lower sheen, you need to use a deglosser on the wall.
3. When your painting and wanting a smooth, durable finish in paint..you can go out and buy expensive paint....
But if you ever use a cheap brush or roller, then your paying a lot of money for nothing. Cheap-o products like that tend to leave brush marks, and some roller covers shed . I suggest using any ';Purdy Products';.
4. If you ever use oil base on anything...and you want to use a latex on top of that. You can't It will not stick. You will first use a oil primer on what your trying to put a latex product on. Then You may use latex on the oil primer. Oil will go over latex , Latex will not go over oil unless you have the oil primer. Pretty simple?
5. Don't know if you have Oil or Latex base? Purchase a product called denatured alcohol. If the color is white, use a colored rag. If it is a color besides white, use white rag. First put some on the rag and rub on Trim, Wall of what your trying to see what type of paint you have. If the paint comes off on the rag...It is latex paint. If it just cleans the paint, trim ect and does not have any on the rag it is oil base. Typically the first sign of oil base paint is yellowing cast!
6. Paint sheens- Flat -Use on walls with poor condition and uneven places, flat helps hide those blemishes on the wall and spots. Never use anything higher than flat unless you want it to be seen. The more sheen the more noticeable your imperfections in the wall will be. Eggshell- Pretty much the same thing as Satin- They both have wash-ability but satin has a hair of more sheen than eggshell. Semi-gloss and High-gloss are very washable but also the hardest to touchup.
The higher the sheen it is, the harder to touch up. The Lower the sheen hides spots on walls and you have wash-ability!
Final words!-----
Whatever you paint your walls do one step up of sheen so your trim, ect will stand out!
If you run out of paint and need more paint corner to corner and stop if you see you can't make it to the other, you will run into dried lines in the wall that you can't get rid of!
Sorry it was a bit lengthy, but if you need more info, questions.
Feel free to email me at jbpk86@yahoo.com :)
TAKE CARE %26amp; Good LUCK!Painting over a faux finish paint??
Kilz primer should do the trick! It is available at Home Depot or most any hardware store. They have an oil based and water based product. The oil base will definitely work and you can paint over it with a latex product when it is dry. If fumes will be a problem you should go with the water based product. It doesn't cover quite as well and may take more coats. Good luck!
A light sanding to roughen the surface and then a good primer would be the way to go. You can still do this now. But most likely you will have to spread a thin layer of stucco to make sure it adheres properly. I had this problem with an oil based faux finish. We sanded, then skimmed a thin coat of dry wall mix, to even out the surface, then primered. You would never know what was underneath.
I'm guessing you have an Oil vs. Water paint issue...
(Like salad dressing) Oil will sit on water, but not the other way around...
If your glaze was a latex (water) based product, and now you are applying an oil (alkyd) based paint over it, it will not stick...
Yes, you should have primed the wall first.
Hi, I actually work at Home depot. lol So I deal with Behr Faux Finish. You should have primed it def! Use the Kilz Primer and Sealer or whatever Paint your going to use get that products primer and have it tinted as much as possible to the color your doing to help reduce your topcoats! Reason to prime bottom line, paint doesn't expect another layer there, primer does so it can be described as double sided tape. It adheres whatever is applied on top of it.
Since you have done it and it's not sticking. If it's peeling you will have to sand. Not fun, but honestly.....Sand, Clean it up good from the grit, Prime, then paint.
Just something to remember: Knowledge
1. If you ever do a big color change, get a tinted primer to what your painting with.
2. If you ever use a semi-gloss or something with sheen and then do a lower sheen, you need to use a deglosser on the wall.
3. When your painting and wanting a smooth, durable finish in paint..you can go out and buy expensive paint....
But if you ever use a cheap brush or roller, then your paying a lot of money for nothing. Cheap-o products like that tend to leave brush marks, and some roller covers shed . I suggest using any ';Purdy Products';.
4. If you ever use oil base on anything...and you want to use a latex on top of that. You can't It will not stick. You will first use a oil primer on what your trying to put a latex product on. Then You may use latex on the oil primer. Oil will go over latex , Latex will not go over oil unless you have the oil primer. Pretty simple?
5. Don't know if you have Oil or Latex base? Purchase a product called denatured alcohol. If the color is white, use a colored rag. If it is a color besides white, use white rag. First put some on the rag and rub on Trim, Wall of what your trying to see what type of paint you have. If the paint comes off on the rag...It is latex paint. If it just cleans the paint, trim ect and does not have any on the rag it is oil base. Typically the first sign of oil base paint is yellowing cast!
6. Paint sheens- Flat -Use on walls with poor condition and uneven places, flat helps hide those blemishes on the wall and spots. Never use anything higher than flat unless you want it to be seen. The more sheen the more noticeable your imperfections in the wall will be. Eggshell- Pretty much the same thing as Satin- They both have wash-ability but satin has a hair of more sheen than eggshell. Semi-gloss and High-gloss are very washable but also the hardest to touchup.
The higher the sheen it is, the harder to touch up. The Lower the sheen hides spots on walls and you have wash-ability!
Final words!-----
Whatever you paint your walls do one step up of sheen so your trim, ect will stand out!
If you run out of paint and need more paint corner to corner and stop if you see you can't make it to the other, you will run into dried lines in the wall that you can't get rid of!
Sorry it was a bit lengthy, but if you need more info, questions.
Feel free to email me at jbpk86@yahoo.com :)
TAKE CARE %26amp; Good LUCK!Painting over a faux finish paint??
Kilz primer should do the trick! It is available at Home Depot or most any hardware store. They have an oil based and water based product. The oil base will definitely work and you can paint over it with a latex product when it is dry. If fumes will be a problem you should go with the water based product. It doesn't cover quite as well and may take more coats. Good luck!
A light sanding to roughen the surface and then a good primer would be the way to go. You can still do this now. But most likely you will have to spread a thin layer of stucco to make sure it adheres properly. I had this problem with an oil based faux finish. We sanded, then skimmed a thin coat of dry wall mix, to even out the surface, then primered. You would never know what was underneath.
I'm guessing you have an Oil vs. Water paint issue...
(Like salad dressing) Oil will sit on water, but not the other way around...
If your glaze was a latex (water) based product, and now you are applying an oil (alkyd) based paint over it, it will not stick...
Yes, you should have primed the wall first.
What kind of faux painting could anyone suggest please?
the cabinets in the house i am renting are just painted plywood. (drawer fronts too) i have done barn red faux bricks along all of the backsplash. thinking of a warehouse look kind of...obviously decorating is not my forte. the walls are fine, fresh paint with simple flat trowel texture. a tiny tinge of yellow white paint...not eggshell more yellowish.(whatever the landlord got on special) my idea would be to have the cabinets framed chicken wire..too much work and expense for renting. faux woodgraining?? open to any ideas...thanksWhat kind of faux painting could anyone suggest please?
You said that you are renting ,I hope that you wont get into any troubles for painting things that are not yours, you like chicken wire just get wire egg baskets and you could paint some stencils like this one on the cabinets
jpg%26amp;imgrefurl=http://painting.about.co鈥?br>
http://farm1.static.flickr.com/43/244359鈥?/a>
http://images.google.com/imgres?imgurl=h鈥?/a>
You said that you are renting ,I hope that you wont get into any troubles for painting things that are not yours, you like chicken wire just get wire egg baskets and you could paint some stencils like this one on the cabinets
jpg%26amp;imgrefurl=http://painting.about.co鈥?br>
http://farm1.static.flickr.com/43/244359鈥?/a>
http://images.google.com/imgres?imgurl=h鈥?/a>
Murals and faux painting help!?
I will be looking for a job pretty soon and I would love to be in the painting/art industry since I'm good at it. (so I think) I been doing murals and faux painting on my own house I would love to try my luck out there but I'm so new to this place I would welling to be just apprentice/helper to a muralist or fauxpainters or maybe designer just to start until I found my calling eighter I survive doing this or have my own license.
I live in Issaqauah WA so please if anyone knows where to find them please please help me. Website or whatever lead I really appreciate it. Thank you
Any thought or suggestion are welcome.
Or if you are the interior faux and murals painter and need helper please give me shout here. Thank again!Murals and faux painting help!?
Ok......for mural practice get a couple of sheets of sheetrock from the hardware store. Prime them with regular house paint and practice (whole 4'X8' sheets to get used to the wall). The surface is different, literally sucks the vehicle out of paint at first, and requires adjustment in application. When you get the kind of appearance and scenes you want photograph them. Next, get someone, even your own folks, to allow you to paint a mural in their house somewhere, powder room, dining room, bedroom....whatever, then photograph it. You will now have at least three examples for your ';book.';
The public library will have some books on faux finishing that have really good step by step techniques for more professional finishes -not like the low end technique books from a hobby/craft store, more sophisticated finishes. STUDY STUDY STUDY....practice on 1' X 1' test panels cut from sheetrock (usually about 10 bucks for a 4'X8' sheet)- when you get really nice looking samples, bind the edges of the sheetrock to make them look neat and you have samples to show potential clients. Honestly if you work for someone else with the intention of becoming their competition theyre not going to be happy with that arrangement.
With the real estate market and general economy being so bad its actually a good time to learn. Be prepared for NO business for a while, but when things loosen up there will be lots of pent up energy in the market and you'll be ready to visit the area interior decorators to invite them to use you, the local home builders to fancy-up their model homes and so on.
Been there, done that, ask if you need other info.Murals and faux painting help!?
It is not easy to find work as an apprentice to a muralist since they guard their clients and their way of working very well. What i would do is look online for schools that teach Faux painting and they can get you into the field. Also the local home improvement stores can point you in the right direction. Just go to their paint department and ask if they know anybody.
I live in Issaqauah WA so please if anyone knows where to find them please please help me. Website or whatever lead I really appreciate it. Thank you
Any thought or suggestion are welcome.
Or if you are the interior faux and murals painter and need helper please give me shout here. Thank again!Murals and faux painting help!?
Ok......for mural practice get a couple of sheets of sheetrock from the hardware store. Prime them with regular house paint and practice (whole 4'X8' sheets to get used to the wall). The surface is different, literally sucks the vehicle out of paint at first, and requires adjustment in application. When you get the kind of appearance and scenes you want photograph them. Next, get someone, even your own folks, to allow you to paint a mural in their house somewhere, powder room, dining room, bedroom....whatever, then photograph it. You will now have at least three examples for your ';book.';
The public library will have some books on faux finishing that have really good step by step techniques for more professional finishes -not like the low end technique books from a hobby/craft store, more sophisticated finishes. STUDY STUDY STUDY....practice on 1' X 1' test panels cut from sheetrock (usually about 10 bucks for a 4'X8' sheet)- when you get really nice looking samples, bind the edges of the sheetrock to make them look neat and you have samples to show potential clients. Honestly if you work for someone else with the intention of becoming their competition theyre not going to be happy with that arrangement.
With the real estate market and general economy being so bad its actually a good time to learn. Be prepared for NO business for a while, but when things loosen up there will be lots of pent up energy in the market and you'll be ready to visit the area interior decorators to invite them to use you, the local home builders to fancy-up their model homes and so on.
Been there, done that, ask if you need other info.Murals and faux painting help!?
It is not easy to find work as an apprentice to a muralist since they guard their clients and their way of working very well. What i would do is look online for schools that teach Faux painting and they can get you into the field. Also the local home improvement stores can point you in the right direction. Just go to their paint department and ask if they know anybody.
What is faux painting?
Faux painting (or faux finishing) usually refers to illusionistic painting on the walls of a room.
For instance, if a room is just drywall but you'd like to make it look like marble without actually putting marble slabs on the wall, you would faux paint a marble-like texture using paint only onto the wall to make it appear as if the wall was made of marble. This can be done to replicate any texture desired such as wood, metal, leather, etc.What is faux painting?
an imitation of a real paintingWhat is faux painting?
Paint applied by an artist to a surface in a manner to match a certain pattern and color desired. Normally requires a base coat of paint with numerous other coats of other color paint to achieve the desired look. Faux painting is used on walls and many other surfaces. Almost any faux look can be accomplished..
Faux painting is a fake or inexpensive way to paint/decorate without spending a huge amount of money to get professional looking results. You can make your wall look like suede/leather without putting suede/leather on them, marble, stone, brick, crackle, wood, textured, etc. You can also make them look more dimensional with layers of colors. Using a ragging technique or stipple effect. You can also paint things on your walls to make it look like something is there but isn't. Like a window or a cabinet. This is called Trompe L'oeil which means to fool the eye. I hope I helped.
Faux Painting is when paint is applied by an artist to a surface in a manner to match a certain pattern and color desired. Normally, it requires a base coat of paint with numerous other coats of other color paint to achieve the desired look. Faux painting is used on walls and many other surfaces. Almost any faux look can be accomplished.
Faux finishing are techniques used to create appearance of texture. You can use simple techniques to make a wall look marbled, rough, weathered and so on. Your local mega-hardware store can provide books, instructions, paint and tools.
an imitation print?
Artificial painting i suppose
Simply put...faux painting is making an oak table look like leopard skin using paint.microsoft web hosting
For instance, if a room is just drywall but you'd like to make it look like marble without actually putting marble slabs on the wall, you would faux paint a marble-like texture using paint only onto the wall to make it appear as if the wall was made of marble. This can be done to replicate any texture desired such as wood, metal, leather, etc.What is faux painting?
an imitation of a real paintingWhat is faux painting?
Paint applied by an artist to a surface in a manner to match a certain pattern and color desired. Normally requires a base coat of paint with numerous other coats of other color paint to achieve the desired look. Faux painting is used on walls and many other surfaces. Almost any faux look can be accomplished..
Faux painting is a fake or inexpensive way to paint/decorate without spending a huge amount of money to get professional looking results. You can make your wall look like suede/leather without putting suede/leather on them, marble, stone, brick, crackle, wood, textured, etc. You can also make them look more dimensional with layers of colors. Using a ragging technique or stipple effect. You can also paint things on your walls to make it look like something is there but isn't. Like a window or a cabinet. This is called Trompe L'oeil which means to fool the eye. I hope I helped.
Faux Painting is when paint is applied by an artist to a surface in a manner to match a certain pattern and color desired. Normally, it requires a base coat of paint with numerous other coats of other color paint to achieve the desired look. Faux painting is used on walls and many other surfaces. Almost any faux look can be accomplished.
Faux finishing are techniques used to create appearance of texture. You can use simple techniques to make a wall look marbled, rough, weathered and so on. Your local mega-hardware store can provide books, instructions, paint and tools.
an imitation print?
Artificial painting i suppose
Simply put...faux painting is making an oak table look like leopard skin using paint.
Kitchen faux painting?
Im redoing my kitchen and the walls are really bad, meaning lots of damage done over the years plus we removed the wallpaper. We did sand but it still looks crappy for a smooth finish of paint. So....I thought I would try to faux paint so that it looks like it might have a textured look. Or does anybody have any ideas for another look? I want to make sure it will be able to be cleaned easy also we all know kitchen walls can get dirty with cooking and grease. Thanks for any help. One more thing, Im going for french country look. So mostly natural colors are going to be used. Kitchen faux painting?
If the walls are not smooth they could be very difficult to clean regardless of the paint job. There are a couple of options.
#1) Install new drywall. It's not very difficult and will give you a nice smooth surface to work with. You can search the web for sheetrock or drywall installation, there are tons of sites with great directions and pictures that make it very easy to follow and understand.
#2) Float the wall. Get a 5 gallon pail (that should be enough depending on the wall size) of joint compound and basically trowel it all over the wall. Sort of like plastering. It may end up being easier to do this rather than try and patch up every hole, crack, dent, etc... (that would option #2 1/2 ;-) Then you can sand it and have a nice smooth surface to work with.
#3) Paneling. It comes in all types of styles and colors/stains or can be painted. Perhaps a wainscoting (paneling), chair rail and flat upper wall(1/4'; sanded plywood) painted or stained to your liking.
Any of the above methods will still allow you to do any type of painting you like, smooth or textured. I would also suggest a semi-gloss paint for ease of cleaning.
If the walls are not smooth they could be very difficult to clean regardless of the paint job. There are a couple of options.
#1) Install new drywall. It's not very difficult and will give you a nice smooth surface to work with. You can search the web for sheetrock or drywall installation, there are tons of sites with great directions and pictures that make it very easy to follow and understand.
#2) Float the wall. Get a 5 gallon pail (that should be enough depending on the wall size) of joint compound and basically trowel it all over the wall. Sort of like plastering. It may end up being easier to do this rather than try and patch up every hole, crack, dent, etc... (that would option #2 1/2 ;-) Then you can sand it and have a nice smooth surface to work with.
#3) Paneling. It comes in all types of styles and colors/stains or can be painted. Perhaps a wainscoting (paneling), chair rail and flat upper wall(1/4'; sanded plywood) painted or stained to your liking.
Any of the above methods will still allow you to do any type of painting you like, smooth or textured. I would also suggest a semi-gloss paint for ease of cleaning.
Monday, February 8, 2010
How do I paint faux wood cabinets?
I'm moving into a condo made in the late 70's and everything about it is great EXCEPT for the old non-wood 'wood' cabinets that look just like that condensed sawdust style. I have NO idea what they're really made of but can i paint them?
How do i go about painting faux wood cabinets?How do I paint faux wood cabinets?
Cover the surface entirely with at least one coat of latex 'Kilz'. You can find this at any home improvement store in the paint dept. Kilz, which is really just a fast-drying primer, will allow you to paint the cabinets any color you want - just use a latex paint over the latex Kilz.
Since Kilz is white, if you paint over with a dark color, you will need at least two paint coats.How do I paint faux wood cabinets?
They sound like pressboard with a veneer. Yeah, thats typical.
Yeah, you can paint 'em.
Personally, I would recommend Gripper over kilz because of Grippers stronger tenacity - Ive used both and will vouch for the Gripper as the superior product.
You can have the primer tinted (and should) toward the finish color.
As far as faux goes, its too much detail to write out here. You can flip though a simple book on faux technique to get the idea of different application methods. Its part art - so.... if you dont really care how it turns out go for it, otherwise consider just a solid paint color for your finish.
How do i go about painting faux wood cabinets?How do I paint faux wood cabinets?
Cover the surface entirely with at least one coat of latex 'Kilz'. You can find this at any home improvement store in the paint dept. Kilz, which is really just a fast-drying primer, will allow you to paint the cabinets any color you want - just use a latex paint over the latex Kilz.
Since Kilz is white, if you paint over with a dark color, you will need at least two paint coats.How do I paint faux wood cabinets?
They sound like pressboard with a veneer. Yeah, thats typical.
Yeah, you can paint 'em.
Personally, I would recommend Gripper over kilz because of Grippers stronger tenacity - Ive used both and will vouch for the Gripper as the superior product.
You can have the primer tinted (and should) toward the finish color.
As far as faux goes, its too much detail to write out here. You can flip though a simple book on faux technique to get the idea of different application methods. Its part art - so.... if you dont really care how it turns out go for it, otherwise consider just a solid paint color for your finish.
Subscribe to:
Posts (Atom)